Astro25 CPS V17.01 now on MOL

Release notes for new versions of programming software and firmware, for any product, should be posted here, as well as topics discussing issues and bugs with and FSB's/SRN's for particular releases.

Moderator: Queue Moderator

Post Reply
User avatar
MTS2000des
Posts: 3347
Joined: Sat Jan 04, 2003 4:59 pm
What radios do you own?: XTS2500, XTS5000, and MTS2000

Astro25 CPS V17.01 now on MOL

Post by MTS2000des »

Just showed up last night, and timing couldn't be better.
Had a UHF XTS5K get stuck in bootload mode during a routine HOST/DSP refresh.
Was about to open a case, send it to Mexico when I logged into MOL around 2100 and noticed both Astro 25 CPS Portable and Mobile versions R17.01 showed up. Downloaded both. Was able to recover the 5K just fine, on first try. No release notes are up or were in the ZIP files, but I noticed the read/write times are much faster, especially with my FPP radios.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
Jim202
Posts: 3609
Joined: Sun Sep 09, 2001 4:00 pm

Re: Astro25 CPS V17.01 now on MOL

Post by Jim202 »

MTS2000des wrote:Just showed up last night, and timing couldn't be better.
Had a UHF XTS5K get stuck in bootload mode during a routine HOST/DSP refresh.
Was about to open a case, send it to Mexico when I logged into MOL around 2100 and noticed both Astro 25 CPS Portable and Mobile versions R17.01 showed up. Downloaded both. Was able to recover the 5K just fine, on first try. No release notes are up or were in the ZIP files, but I noticed the read/write times are much faster, especially with my FPP radios.



Too bad the software geeks can't spend the same effort in even trying to clean up the confusion on the APX software. They must have been drunk when they tried to lay that out. Why can't we have the same format like it has been over the years on the rest of the radio models?

Haven't opened up the new R17.01 version, but will try to get to it by the week end. My wish of getting a true multi PL on the XTL family probably will never happen. Enjoyed using it on the Spectra radios. Think who ever was running that software program must have retired. Because the XTL basically doesn't have a multi PL feature. There is one but you have to come up with a whole RX and TX frequency to use it. What good is that? Sure would be nice to have a table and be able to at least set the TX for a multi PL selection from the table.

Jim
jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Re: Astro25 CPS V17.01 now on MOL

Post by jmr061 »

The release notes along with updated 17.01.01 firmware are available now.

Jason
DPL
Posts: 185
Joined: Wed Jul 31, 2002 5:48 am

Re: Astro25 CPS V17.01 now on MOL

Post by DPL »

I programmed my R15 firmware XTS2500 last night with the new CPS. Read/write times were normal, and it didn't get bricked. A sigh of relief was breathed.
JeffFireRadio
Posts: 345
Joined: Tue Feb 14, 2006 5:39 am

Re: Astro25 CPS V17.01 now on MOL

Post by JeffFireRadio »

And it's about time. :roll: Why, I had to run CPS 17.00 an entire three weeks or so before M got around to changing it...again. Glad it was time to download/upload/program the laptop fleet so soon (insert sarcasm here). Seriously, this has gotten a bit out of hand. Anyone else ready for them to get it right the first time and slow down just a bit on feature upgrades? Yikes, I feel like Jeff Dunham's Walter character.
User avatar
4-crime
Posts: 107
Joined: Wed Jun 11, 2008 3:04 pm
What radios do you own?: APX6000, APX7000, APX8000

Re: Astro25 CPS V17.01 now on MOL

Post by 4-crime »

I ran CPS R17.01.00 on 4 XTS5000's with no issues at all. Read the radios fine and i did notice a good difference in writing to the radios as well, very fast. I also upgraded the firmware in all 4 as well to R17.01.01 and did not have any issues.
User avatar
N4DES
was KS4VT
Posts: 1233
Joined: Thu Dec 25, 2003 7:59 am
What radios do you own?: APX,XTS2500,XTL2500,XTL1500

Re: Astro25 CPS V17.01 now on MOL

Post by N4DES »

4-crime wrote:I ran CPS R17.01.00 on 4 XTS5000's with no issues at all. Read the radios fine and i did notice a good difference in writing to the radios as well, very fast. I also upgraded the firmware in all 4 as well to R17.01.01 and did not have any issues.
Ditto and I did it to XTS2500's.
User avatar
MTS2000des
Posts: 3347
Joined: Sat Jan 04, 2003 4:59 pm
What radios do you own?: XTS2500, XTS5000, and MTS2000

Re: Astro25 CPS V17.01 now on MOL

Post by MTS2000des »

Uplifted for two more XTS5000's using my OEM serial cable, went without a hitch. Using Toughbook CF-29 mk3 and XP SP3.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
User avatar
rc50won
Posts: 234
Joined: Thu Aug 16, 2007 6:37 am
What radios do you own?: Don't ask my wife.

Re: Astro25 CPS V17.01 now on MOL

Post by rc50won »

For those with XTS4000's it' still 01/82 time. Had to go back to R16 CPS.

Marshall
User avatar
N4DES
was KS4VT
Posts: 1233
Joined: Thu Dec 25, 2003 7:59 am
What radios do you own?: APX,XTS2500,XTL2500,XTL1500

Re: Astro25 CPS V17.01 now on MOL

Post by N4DES »

rc50won wrote:For those with XTS4000's it' still 01/82 time. Had to go back to R16 CPS.

Marshall
Really?...I did mine up to 17.00.02 and using 17.01 without any issues. Very strange.
User avatar
rc50won
Posts: 234
Joined: Thu Aug 16, 2007 6:37 am
What radios do you own?: Don't ask my wife.

Re: Astro25 CPS V17.01 now on MOL

Post by rc50won »

Puked on it big time. Gets about 75% into the write then 01/82's. Tried several times. I count my lucky stars I was able to recover.

Marshall
KS4VT wrote:
rc50won wrote:For those with XTS4000's it' still 01/82 time. Had to go back to R16 CPS.

Marshall
Really?...I did mine up to 17.00.02 and using 17.01 without any issues. Very strange.
Post Reply

Return to “Software & Firmware Releases & Issues”