XPR5550 Home Key

Moderator: Queue Moderator

Post Reply
User avatar
arlojanis
Posts: 1044
Joined: Mon Jan 28, 2002 4:00 pm

XPR5550 Home Key

Post by arlojanis »

I am setting up a new XPR5550 for analog only. I programmed a home channel in CPS. The home button on radio and the home button on the keypad mic do not go to the programmed home channel. Does the home button work in analog?
"The world runs on radio."
User avatar
jackhackett
Posts: 1513
Joined: Tue Jun 10, 2003 8:52 am

Re: XPR5550 Home Key

Post by jackhackett »

I don't think Mototrbo uses 'home channel' and 'home button' the way we're used to.

What I've done is setup one of the One Touch Access modes for 'home revert' and then assigned that One Touch to a programmable button.
n1gtl
Posts: 113
Joined: Tue Mar 25, 2008 12:43 pm
What radios do you own?: XPR5550, XPR7550e

Re: XPR5550 Home Key

Post by n1gtl »

It does work in analog but Jack is right. The home button is for going back in the menu navigation. You need to set up a One Touch button and assign it to home revert. The button that you assign it to will display "OT-1". (or OT-2, OT-3, OT-4 if you use those too) It will not say Home Revert or anything like that.

Click on BUTTONS on your tree in the left pane. In the right pane, scroll down to "One Touch Access" and set it up there.
Post Reply

Return to “MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers”