XPR 7550 E ISSUE WITH MDC 1200

Moderator: Queue Moderator

Post Reply
DMR4907
New User
Posts: 2
Joined: Tue Mar 12, 2019 7:56 am

XPR 7550 E ISSUE WITH MDC 1200

Post by DMR4907 »

Hi

I have a issue with the MDC group alert
If I use group 130 it’s fin[e]

However if I have a group of E1FF it does not break the mute or tone when this MDC alert is sent by a dispatcher

How do I set up the radio with my CPS to get this group format to work E1FF

If you can give me the steps it would be appreciated

Thank you
Last edited by alex on Thu Aug 08, 2019 3:14 am, edited 1 time in total.
Reason: fixed spelling... maybe.
ve3nsv
Posts: 291
Joined: Sat May 27, 2006 8:43 am

Re: XPR 7550 E ISSUE WITH MDC 1200

Post by ve3nsv »

From the help pane.

Primary ID (Hex)
This is the ID used to identify Motorola Data Communication (MDC) messages transmitted to a radio. It is sent out to the target radio during Call Alert or emergency. A user may enter up to a maximum of 4 hexadecimal digits in the text box.
Range
Maximum
DEEE
Minimum
0001
Increment
1 (Hex)
Notes
The character F(Hex) is not allowed for any of the digits.
This feature is applicable to MOTOTRBO Conventional radios in Analog mode only.
User avatar
jackhackett
Posts: 1513
Joined: Tue Jun 10, 2003 8:52 am

Re: XPR 7550 E ISSUE WITH MDC 1200

Post by jackhackett »

He's talking about the group ID, not the primary ID. I've never set up group IDs myself, but here's a link to some information on them.

http://www.cimtechcorp.com/images/uploa ... eet_ID.pdf
Post Reply

Return to “MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers”