XPR7550/7580/6550/6580 in amateur bands

Moderator: Queue Moderator

Post Reply
k3td
Posts: 88
Joined: Sun Apr 06, 2003 6:38 pm
What radios do you own?: MCS2000, MTX9250, XPR7550e

XPR7550/7580/6550/6580 in amateur bands

Post by k3td »

What, if anything, is involved in programming these portables for DMR and conventional frequencies in the 2 meter, 440 and 902 MHz bands? Several years ago I programmed my 5550 and as I recall there was nothing I needed to do to get it to accept frequencies in the 440-450 MHz range?

Thanks and 73,
Tad, K3TD
fchrist16
Posts: 347
Joined: Sun May 24, 2009 12:23 am
What radios do you own?: Desktrac, XTL/XTS's & XPR's

Re: XPR7550/7580/6550/6580 in amateur bands

Post by fchrist16 »

The UHF (6550) works fine in the ham bands by default. I have a ton of stuff programmed into the two I have.

Regards,

-Frank C.
N4KVE
Posts: 1647
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: APX XTS XTL TRBO 900MHZ

Re: XPR7550/7580/6550/6580 in amateur bands

Post by N4KVE »

VHF, & UHF, no problem. Straight up program the radio. But for 902, you’ll have to hex edit the CPS. GARY.
Post Reply

Return to “MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers”