XPR8300 and RF amplifiers

Moderator: Queue Moderator

Post Reply
n1gtl
Posts: 113
Joined: Tue Mar 25, 2008 12:43 pm
What radios do you own?: XPR5550, XPR7550e

XPR8300 and RF amplifiers

Post by n1gtl »

I have done some Internet searching on this matter and cannot find a clear answer.

When a MotoTRBO client transmits, it does so switching on and off rapidly (about 30ms on then off). Repeaters on the other hand, being full duplex, are in TX mode 100% of the time. Can a "standard" (Henry) amplifier be used with a Mototrbo repeater? I see sites advertising "digital" or "TDMA" amps. I know the clients are a different animal, having to rapidly switch TX and RX but if a repeater is not doing this switching, shouldn't a standard RF amp work?
User avatar
Bigred
Posts: 101
Joined: Mon Apr 14, 2008 7:08 pm
What radios do you own?: Junk that comes and goes...

Re: XPR8300 and RF amplifiers

Post by Bigred »

You're assumptions are correct. I have one XPR8400 using a Henry amp and it plays just fine.
Lots and lots of watts...
Post Reply

Return to “MotoTRBO Repeaters, Trunking, and Site Infrastructure”