XTL2500 - does remote head firmware need to match body firmware?

Moderator: Queue Moderator

Post Reply
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

XTL2500 - does remote head firmware need to match body firmware?

Post by g8tzl2004 »

I have a remote mount 110W VHF XTL2500.

Can I use the remote head from the VHF 110W radio on a 50W UHF brick without doing any firmware updates or option updates to the head (or brick)?

Or does the remote head contain firmware that needs to match the brick firmware?

Thanks
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

Re: XTL2500 - does remote head firmware need to match body firmware?

Post by tuckerm »

You should be fine. Worst case scenario you'll need to do a CH sync. I've flipped flopped the O5 heads between an APX, and high/mid XTLs.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: XTL2500 - does remote head firmware need to match body firmware?

Post by g8tzl2004 »

Thanks.

How do you do a CH sync?
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

Re: XTL2500 - does remote head firmware need to match body firmware?

Post by tuckerm »

It's an option within CPS. I've never needed to do it.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
Post Reply

Return to “ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers”