MIP 5000 TX audio cutting in and out

Discussion about Centracom (Button & LED / CRT / Gold / Elite), MC Series (MC5500/7100/7500), and legacy console equipment.

Moderator: Queue Moderator

Post Reply
New User
Posts: 2
Joined: Wed May 25, 2016 11:53 am

MIP 5000 TX audio cutting in and out

Post by scottyinkcmo »

We have just installed the MIP 5000 system last week. 4 station computers with a 4 radio license system. We are having problems with TX receiving audio cutting in and out, or our units are having to call in to us multi times before we can hear them. Also we are getting dropped connections during the middle of TX like a dropped cell phone call. Very annoying!!! Any body have a possible reason why we might have this problem? We have increased the jetter to 100 MS with no improvements. Any help would be of great!!!
Posts: 237
Joined: Wed Jul 15, 2009 4:29 pm
What radios do you own?: Motorola

Re: MIP 5000 TX audio cutting in and out

Post by desperado »

Get wire shark on the switch were the audio gateways are and do a port mirror or use a tap. Look at the traffic coming into the gateway and see if the audio cuts out before it is received by the gateway
Field Tech
What more can I say
Post Reply

Return to “Consoles”