Looking for generic spacers for mounting/installs

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Looking for generic spacers for mounting/installs

Post by RFguy »

We used to use a Motorola spacer for various applications.

They used to cost about 10 cents each, but the price took a huge jump recently, so I'm looking for an alternate.

The Motorola part# is a 4382292M01

They are .325” thick, 0.75” round and have a 0.25” hole in the center. They are a non-brittle plastic material (nylon?).

They look just like the one to the right of center of this picture. Does anyone know of a source for something like these? I'm looking for a few hundred. The Motorola ones were gray, but any color is OK.

Image
User avatar
Astro Spectra
Posts: 668
Joined: Sat Sep 22, 2001 4:00 pm

Re: Looking for generic spacers for mounting/installs

Post by Astro Spectra »

Faucet washers?
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Re: Looking for generic spacers for mounting/installs

Post by RFguy »

Astro Spectra wrote:Faucet washers?
Thanks AS. They would be made of a compressible rubber. I'm looking for a ridged material that wouldn't compress under tension.

We often use these under mounting brackets to take up space or to compensate for irregular surfaces.
User avatar
Astro Spectra
Posts: 668
Joined: Sat Sep 22, 2001 4:00 pm

Re: Looking for generic spacers for mounting/installs

Post by Astro Spectra »

Actually they started out being made of fibre but today the good new ones are made of nylon or polypropylene (the dangers of knowning a plumber).

But anyway try P/N SP 222 from E&T, this will give you 0.3125 thick with 0.5 OD and 0.257 ID, see:

http://www.fastenercomponents.com/produ ... -p-21.html

Plenty of options depending on exactly what dimension is most critical. They take PayPal and credit cards.
User avatar
FMROB
Posts: 1002
Joined: Sun Jan 12, 2003 2:28 pm

Re: Looking for generic spacers for mounting/installs

Post by FMROB »

Any good ace hardware that sells a selection of Hillman fasterners should have them available in both nylon in white and black. Don't know about pricing? Rob
User avatar
SteveC0625
Posts: 467
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: Looking for generic spacers for mounting/installs

Post by SteveC0625 »

FMROB wrote:Any good ace hardware that sells a selection of Hillman fasterners should have them available in both nylon in white and black. Don't know about pricing? Rob
+1

Even Lowes and Home Depot have them in their speciality hardware section right along side cotter pins and such.

Whatever hardware store or home improvement center is nearby can probably order them in quantity for you.
Post Reply

Return to “Vehicle Radio Installs”