Name this console...

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Name this console...

Post by alex »

Image

Hey Guys...

I don't have a clue who makes these consoles as they have no stickers on them... Can you identify what type this is so I can buy some faceplates? (Bonus points if your a dealer and have good pricing on 'em).

Thanks,

Alex

(PS Sorry for the crappy image.)
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: Name this console...

Post by fineshot1 »

Well, perhaps you can work on a better pic or pics but going by what I see(which aint much)
it reminds me of a Havis-Shields console as it is very squared off and boxy looking and it also
seems to have the bolts at the bottom which I think is the way they attach to the mounting
trays.
fineshot1
NJ USA
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Re: Name this console...

Post by alex »

Well, this one just has a channel which has a bunch of bolts in it that run the length of the channel. You move the bolt to where you want to lock down the bracket, and drop the screw in.

I was almost thinking Havis, but don't know well enough.

I can take a better photo tonight, but I was hoping someone would recognize the channel.

-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Re: Name this console...

Post by alex »

Ok, it was pointed out to me via IM that it's probably a Havis C Series console...

I need to get 4 CDM brackets, 2 A/W7 dash mount brackets, and a couple of Vertex brackets, but I have no idea what model [yet].

If you can help me out - drop me a PM.
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Mraudio
Posts: 100
Joined: Sun Jan 27, 2008 6:48 am
What radios do you own?: Quantar/AS/A-spec./VertexP25

Re: Name this console...

Post by Mraudio »

Alex last I knew Havis-Troy-Jotto faces all interchanged just the material and thickness is "slightly" different. I believe you could use any of them. FYI this may be a lesser known company called Stuart-stewart someting to that effect
Jeff
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Re: Name this console...

Post by alex »

Yeah, we are using a mismash of plates. We found a solution that will work, it's a bit of a pain, but it'll work.

Thanks guys....

-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Post Reply

Return to “Vehicle Radio Installs”