NTN9176 Wiring Schematic

[Beefcake1860]

Hello -
I have a Motorola Cube Charger (NTN9176A) that the power cable was lost on. I am looking to make a new cable, and need the pin out for the plug.

Anyone help?

[fineshot1]

See this thread below

http://batboard.batlabs.com/viewtopic.php?f=8&t=46184

and

Pin 1 Red +12V to the Battery
Pin 2 White PAC-RT
Pin 3 not used
Pin 4 Yellow +12V Ignition Sense
Pin 5 not used
Pin 6 Black Vehicle Ground

EDIT: forgot to add that the Pin 1 +12V main power should have a 2A fuse inline
and the ignition sense is supposed to be a 1/4 amp fuse.