xtl2500 M5 head remote mount fuse values

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
adlertom
Posts: 238
Joined: Mon May 19, 2003 12:20 pm

xtl2500 M5 head remote mount fuse values

Post by adlertom »

I'm looking for the fuse values for both the red power and yellow ignition sense wires for a remote mount M5 head XTL2500.

The installation manual says to use either a 3 or 4 amp for the ignition sense wire, but doesn't say what to use for the power wire.

Thanks,

Tom
Top
JeffFireRadio
Posts: 345
Joined: Tue Feb 14, 2006 5:39 am

Re: xtl2500 M5 head remote mount fuse values

Post by JeffFireRadio »

I have a new cable set for the XTL head sitting here still in the M bag...the red wire fuse holder has a 5 amp blade and the yellow wire fuse holder has a 3 amp blade. -Jeff
Top
adlertom
Posts: 238
Joined: Mon May 19, 2003 12:20 pm

Re: xtl2500 M5 head remote mount fuse values

Post by adlertom »

JeffFireRadio wrote:I have a new cable set for the XTL head sitting here still in the M bag...the red wire fuse holder has a 5 amp blade and the yellow wire fuse holder has a 3 amp blade. -Jeff
Thanks, that's what I needed to know!
Top
Post Reply

Return to “Vehicle Radio Installs”