Does anyone know a source for an inline fuse holder that will accept 2AWG stranded wire? All I get when searching is this $50 stereo equipment junk. I just want a simple fuse holder, preferably waterproof, that can handle 2AWG. TIA
-Wayne
Source for 2AWG inline fuse holder (AGU or ANL)
Moderator: Queue Moderator
-
Twisted_Pear
- Batboard $upporter
- Posts: 510
- Joined: Thu Sep 06, 2001 4:00 pm
Source for 2AWG inline fuse holder (AGU or ANL)
Last edited by Twisted_Pear on Thu Oct 23, 2003 7:40 pm, edited 1 time in total.
Try Graingers
Cooper Bussman pt # 2A590
#14-#2 60A max.
They are wholesale only, but if you can't get them
to sell to you , I would be happy to help.
(Check out the website @ http://www.grainger.com)
J.B. AD6WX
Cooper Bussman pt # 2A590
#14-#2 60A max.
They are wholesale only, but if you can't get them
to sell to you , I would be happy to help.
(Check out the website @ http://www.grainger.com)
J.B. AD6WX
The one that Parts Express sells is solid brass internals with o-ring seals and is waterproof. It accepts AGU glass fuses and #4.
(#070-660) It accepts stranded.
Using #2 with the AGU isn't the best idea since the AGU is only capable of a reliable 60A continuous. With #2, we'll assume you're looking for more than 60A.
To handle the current that will flow on a #2 (if you really do need #2) , you are better off using a wafer-type fast-blow fuse with crimped and/or soldered copper lugs.
(#263-630)
Both are well constructed and take heat with no problem.
A word about materials from Graingers: Although they are very well constructed, these are mostly for high voltage use. The fuses that fit most of these fuseholders are designed for interior use. The fuse's current ratings are also rated for AC current. Also, if you are working on an OEM application or will be installing in a new vehicle, note that most of these "industrial" components carry no type of certification for mobile use such as DOT or SAE- which can be quite important if you are dealing with a $700,000 ladder truck or command truck and it burns up (even if not caused by your install).
We hate to have to think of things this way, but if this would happen and an insurance company discovers you used a non-approved fuse or component in an installation that carries 140 amps, guess who has a problem whether or not they caused the damage?
Cover You Ass!
Some stereo components aren't SAE/DOT approved, BUT....they, at least, are high quality components designed for 12 volts in a mobile application.
http://www.partsexpress.com
also, call TST. This company makes many 12 volt componets used by most OEM manufacturers.
TST- 1-800-428-4449
The TST units would be the best, although more $$
(#070-660) It accepts stranded.
Using #2 with the AGU isn't the best idea since the AGU is only capable of a reliable 60A continuous. With #2, we'll assume you're looking for more than 60A.
To handle the current that will flow on a #2 (if you really do need #2) , you are better off using a wafer-type fast-blow fuse with crimped and/or soldered copper lugs.
(#263-630)
Both are well constructed and take heat with no problem.
A word about materials from Graingers: Although they are very well constructed, these are mostly for high voltage use. The fuses that fit most of these fuseholders are designed for interior use. The fuse's current ratings are also rated for AC current. Also, if you are working on an OEM application or will be installing in a new vehicle, note that most of these "industrial" components carry no type of certification for mobile use such as DOT or SAE- which can be quite important if you are dealing with a $700,000 ladder truck or command truck and it burns up (even if not caused by your install).
We hate to have to think of things this way, but if this would happen and an insurance company discovers you used a non-approved fuse or component in an installation that carries 140 amps, guess who has a problem whether or not they caused the damage?
Cover You Ass!
Some stereo components aren't SAE/DOT approved, BUT....they, at least, are high quality components designed for 12 volts in a mobile application.
http://www.partsexpress.com
also, call TST. This company makes many 12 volt componets used by most OEM manufacturers.
TST- 1-800-428-4449
The TST units would be the best, although more $$
-
Twisted_Pear
- Batboard $upporter
- Posts: 510
- Joined: Thu Sep 06, 2001 4:00 pm
The reason I'm using 2 gauge is I get it for free. I'm primarily using it to run a Statpower inverter that'll do 800W continuous. And that's, what, 60 amps? I doubt I'll need that much but I'd like to be built for it. Ya know that old saying, it's better to have and not need.....
In addition it will feed a couple commercial rigs, none of which would probably be used while I was drawing serious amps from the inverter.
-Wayne
In addition it will feed a couple commercial rigs, none of which would probably be used while I was drawing serious amps from the inverter.
-Wayne