CM300 Question

Donnie5063 · Post by **Donnie5063** » Fri Feb 27, 2004 2:27 pm

I couldnt find anything on this by searching either so i'll ask. Does the CM300 mobiles and the CP200 portables use the same RSS? Anymore tips about the CM300 cable yet? Thanx, Donniezle

Al · Post by Al » Fri Feb 27, 2004 8:06 pm

RVN4191 - E is the latest revision - programs the CP150, CP200, PR400, CM200, CM300, and PM400 radios.

Donnie5063 · Post by **Donnie5063** » Sat Feb 28, 2004 5:44 am

thanks!

dalej · Post by **dalej** » Sat Feb 28, 2004 6:44 pm

Use the rib to maxtrac/radius/gm300 cable and then jumper the rj45 mic plug from pin 1 to pin 3
This supplies the B+ of the radio to pin 3 of the mic jack to alow programing.

I have built several of these and they work fine.

I have sent this info to batlabs so that maybe they can put it in there list.

RADIONET · Post by **RADIONET** » Thu Mar 18, 2004 7:27 am

Are you shure about this change ?

I looked the schematics and this jumper does not look right .

Tks

Pump3 · Post by **Pump3** » Wed Aug 02, 2006 5:17 pm

Does anybody have any pics to illustrate what is meant by jumpering the pins?

CM300 Question

CM300 Question

Program cable for CM 200 or 300