MTSX/MTX Programming Question.

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
lennone
Posts: 4
Joined: Fri Oct 05, 2001 4:00 pm

Post by lennone »

Does anyone know if MTSX RSS Software will program an MTX 810. In the "Read ME" section of the MTSX RSS it says that MTX 810 info can be read from an MTX 810 into the software which can then be used to program the newer version radio(MTX8000). My question is, can I read the info from a programmed MTX 810 and then drop it into another MTX 810 using the MTSX software? I don't have access to MTX 810 software but have recently came into possession of a couple of these radios. It would be convenient if I can do this... Thanxs in adavnce......
Top
John
Posts: 387
Joined: Sun Sep 09, 2001 4:00 pm

Post by John »

I am not sure of the answer to your question since I have never seen an MTX810. However, I know there is a separate RSS for the MTX810. I have an older version of this (R02.01.01).

John
Top
lennone
Posts: 4
Joined: Fri Oct 05, 2001 4:00 pm

Post by lennone »

John, I sent you an email... Thanks for the info.
Top
patrol186
Posts: 57
Joined: Mon Sep 10, 2001 4:00 pm

Post by patrol186 »

MTSX will not programm a mtx810,
they are in a different series, if the mtx is a jedi series ( mtx8000/9000) then i believe the software will work
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”