well i have a Saber 2120 channels and am wanting to stick it in a Saber 3 case to get full use of my 120 channels and dtmf.
but im wondering it should swap directly and also what other parts do i need and is the keypad built in to the housing like my Saber 2?
Saber 3 case
Moderator: Queue Moderator
-
Astro_Saber
- Fail 01/90
- Posts: 837
- Joined: Wed Sep 05, 2001 4:00 pm
-
Elroy Jetson
- Posts: 1158
- Joined: Mon Sep 03, 2001 4:00 pm
If the radio already has the full 15 button membrane switch on the front shield, you don't need to do anything but swap housings and reprogram the radio as a Saber III.
If it only has a 3 button membrane switch, you'll have to get a new 15 button membrane switch, too, which is typically only available with a replacement shield kit and costs about 70 dollars. You can get just the keypad but you'll have to go through Parts Id to get it. 1-800-422-4210.
Elroy
If it only has a 3 button membrane switch, you'll have to get a new 15 button membrane switch, too, which is typically only available with a replacement shield kit and costs about 70 dollars. You can get just the keypad but you'll have to go through Parts Id to get it. 1-800-422-4210.
Elroy