jt1000 mdc1200 and scan list question?

[applehead57]

Hi Guys,
I just picked up a JT100 UHF an "A" version radio. I dont see any MDC1200 options in the RSS. Is the radio capable of it and if so how do I enable it. Also I can set up one of the side buttons to scroll the scan list status, but is there a way to edit the scan list? The RSS has options to view the list from a side button and a scan programming alert from the alerts menu, but i dont know how to field program the scan list or if it can even be done.
Thanks
Chris



<font size=-1>[ This Message was edited by: applehead57 on 2001-10-10 21:34 ]</font>

[MT2000 man]

Hi, no the Jt1000 can't do MDC1200, just thought I'd tell you that much

[SD70MAC]

The only way i know to do the scan list edit is to program it for scan program.The buttons should be as follows:

A =SCAN
B = OFF SCAN
C = SCAN PROGRAM


SB 1 = EDIT /DELETE


This is one way to do this give me an idea what all you are putting on it like QC2 or other items.Also it will not do MDC1200.

[Dale Earnhardt]

HUMMM i THOUGHT IT DID MDC1200 ON JT1000, I GUESS MOTOROLA SCREWED UP AGAIN ON THERE ADVERTISMENT

[techie]

I have a UHF jt1000, and I can program the scanlist by holding the green button until it drops into SCAN PROGRAM.

you can them program the scan list by stepping thru the channels with the selector.

the green led indicates that the channel is in the scanlist, and pressing the green button toggles on/off.

holding the green button exits SCAN PROGRAM.

I have not yet looked at the radio with RSS to see how it is setup.

[radioEd]

I have a .pdf file, 42 page operator manual on the JT1000..send me a pvt. message with a email contact, & I'll send it to ya...if you need it? Ed

[radioEd]

It should be in your mailbox. hope it helps.Ed