Motorola JT1000 $?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Hondroid
Posts: 5
Joined: Thu Jul 15, 2004 7:17 am

Motorola JT1000 $?

Post by Hondroid »

Thinking of buying a JT1000 for HAM RADIO USE.

What would the price be for a NEW JT1000 VHF in CANADIAN FUNDS (or US dollars)

Thanks
User avatar
DopeCop
Posts: 20
Joined: Sat Jun 12, 2004 4:05 pm

?

Post by DopeCop »

Depends on if it comes with the programming key as well as the appearance and the age of the battery. Does it come with a mic? Etc.

All things above considered, $500.00 is a reasonable price.
User avatar
Julian
Posts: 298
Joined: Fri Sep 14, 2001 4:00 pm

Post by Julian »

Why get a JT1000? You're limited to 16 channels, you can't modify the alpha tags on the channel w/out the RSS anyways. You can get a 255 channel MT2000 and load every oddball 2 meter / 440 simplex frequency and repeater pair you can think of.
Just because I have a short attention span doesn't mean I...-

"Yesstirdaye I cuddn't spell teknishion, and now I is won!"

"800MHZ sucks range is a joke
UHF has range but VHF has more". - the greatest technician of all time, Astro_Saber.
larryepage
Posts: 221
Joined: Tue Jan 15, 2002 4:00 pm

Post by larryepage »

The last JT1000 I bought new (from an authorized dealer) was an intrinsically safe version with programming key, wide-band antenna, and dual-rate intellicharger. List price for all this was, I think, something over $1300 US. Pricing was similar for VHF and UHF units. If you are planning to use a UHF JT1000 for amateur use, you need the "R" frequency split, by the way.

Since this model has been discontinued, it may be difficult to find one without some searching. I have had an order in for a couple for several weeks, and my dealer (who did not have any in stock) is really having to search.

And by the way...I tend to disagree with some others on the board. If set up properly (to display operating frequencies and squelch codes) and used with the key attached, changing frequencies is pretty quick and easy. I also find that about 16 frequencies is all that can be readily managed in a radio at one time, also. But the other radios mentioned are also good units, if you don't mind being tied to the programming software to make changes. By the way...I find that the biggest problem with pre-programmed radios is not so much managing the frequencies as managing the squelch codes.

Good luck in your search!

Regards,
Larry Page
W5LEP
FCC GROL
SlimBob
Posts: 911
Joined: Thu Dec 18, 2003 11:38 am

Post by SlimBob »

Julian wrote:Why get a JT1000? You're limited to 16 channels, you can't modify the alpha tags on the channel w/out the RSS anyways. You can get a 255 channel MT2000 and load every oddball 2 meter / 440 simplex frequency and repeater pair you can think of.
Que? How's the radio that wide?
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”