P1225 Display problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
radioservice
Posts: 95
Joined: Thu Sep 20, 2001 4:00 pm

Post by radioservice »

I have a Uhf p1225 w/ keypad and display that exhibits the following problem:
Occasionally, when first powered up, it's display will backlight but no characters will display. Any HELP?
Top
Reslock
Posts: 40
Joined: Sun Sep 09, 2001 4:00 pm

Post by Reslock »

It is most likely the controller flex. Open the radio and leave the cable in the connector. power it up and wiggle the cable, it could be loose. Take it out and re-seat it. Use alcohol on a Q-tip to clean it before connecting again. Have fun
JT
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”