Codeplug for Radius mobile 33mhz range

stangmansvo · Post by **stangmansvo** » Fri Nov 12, 2004 6:27 am

Hello everyone,
Im looking for a good codeplug for a M208 (6ch) and M216 (16ch) radius mobile radios. Both of my radios wont program for some unknown reason.
Must be D51 model and one 6ch the other 16ch
thanks
steve

Will · Post by **Will** » Sat Nov 13, 2004 4:27 pm

Steve, need the rest of the model number.

Max-trac · Post by **Max-trac** » Sat Nov 13, 2004 6:41 pm

Are the radios working OK?
Can you read them?
If both just mysteriously have problems, it is more likely you have another problem. IE computer setup problem.
Are you using radmbl and not maxtrac software?

stangmansvo · Post by **stangmansvo** » Sat Nov 13, 2004 8:18 pm

yeah ! Seems crazy to me also
Im using radmbl and both are bad
steve

Max-trac · Post by **Max-trac** » Sat Nov 13, 2004 8:25 pm

Well, if the radios are working OK, then the codeplugs are probably OK.
So check you com port setup under F9, F3 (I think) from the main menu, and other computer hookups.
What is the error you are getting?

stangmansvo · Post by **stangmansvo** » Sun Nov 14, 2004 5:01 am

Yeah the radios work OK! error code 56
Thanks
I will double check things
steve

stangmansvo · Post by **stangmansvo** » Sun Nov 21, 2004 4:53 am

Well I finally got the radios programmed.
seems M100 works on these radios but m208 does not.
Go figure !!

steve

thanks all for your help

Codeplug for Radius mobile 33mhz range

Codeplug for Radius mobile 33mhz range

codeplug

codeplugs

radius codeplugs