GP380 programming problems
Moderator: Queue Moderator
GP380 programming problems
Hi everybody,
i can't programm my GP380, because the CPS 03.02.01 don't recognise my radio (
It displays the following message when i try to read the device :
"Couldn't open port. Check whether Device/RIB are powered on or not, and the device to rib, and the rib to pc connection is ok."
rib is ok, i programmed GP300 without problem.
How to solve the problem??
Thanks for your help.
regards,
Jo
i can't programm my GP380, because the CPS 03.02.01 don't recognise my radio (
It displays the following message when i try to read the device :
"Couldn't open port. Check whether Device/RIB are powered on or not, and the device to rib, and the rib to pc connection is ok."
rib is ok, i programmed GP300 without problem.
How to solve the problem??
Thanks for your help.
regards,
Jo
Connect the RIB to COM1 and change to COM1 in the RSS.Try to program again,before you do something other.If it will not work,you can change
the cover and try it again.You can also use any Waris portable cover to test it.Look at the programmingcable too.
I think you have a defect programming cable,in the first place.The RIB
should be ok,if you can program GP300.
Andreas
the cover and try it again.You can also use any Waris portable cover to test it.Look at the programmingcable too.
I think you have a defect programming cable,in the first place.The RIB
should be ok,if you can program GP300.
Andreas
Hi everybody,
I'm still fighting with my GP380 programmation...
I tried many CPS, on many computers (desktop, laptop) and with 2 different radios. No result...
I always receive the same CPS'answer : "Couldn't open port. Check whether Device/RIB are powered on or not, and the device to rib, and the rib to pc connection is ok."
I noticed an error message when installing the CPS: "File fail to self-register : c:/winnt/system32/pvdt60.ocx". Does anybody know what that exactly mean??
Thanks in advance for your answer.
Regards,
I82
I'm still fighting with my GP380 programmation...
I tried many CPS, on many computers (desktop, laptop) and with 2 different radios. No result...
I always receive the same CPS'answer : "Couldn't open port. Check whether Device/RIB are powered on or not, and the device to rib, and the rib to pc connection is ok."
I noticed an error message when installing the CPS: "File fail to self-register : c:/winnt/system32/pvdt60.ocx". Does anybody know what that exactly mean??
Thanks in advance for your answer.
Regards,
I82