Saber Covertacom Power Cable

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
smilingclyde
Posts: 1
Joined: Thu Apr 25, 2002 6:41 am

Saber Covertacom Power Cable

Post by smilingclyde »

Does anyone have the pin outs for the power cable for a Saber Convertacom. I recently installed one, but we didnt get the power cable. any help on the pin outs would be greatly appreciated.
User avatar
HumHead
Moderator
Posts: 1769
Joined: Tue Sep 25, 2001 4:00 pm

Post by HumHead »

I don't have mine available to me right now, but the color code is available on the batlabs.com Saber page, and the topic has been covered on the discussion board several times. Try the "search" option, and you should find the information that you need.

If you still haven't found what you need, I can look at one of mine tommorow.
N4UMJ
Posts: 227
Joined: Mon Oct 01, 2001 4:00 pm

Post by N4UMJ »

Check this previous discussion on this.

http://batboard.batlabs.com/viewtopic.p ... 68&forum=1

Good Luck on the install !

Ed
N4UMJ
ERC
Posts: 6
Joined: Tue Oct 30, 2001 4:00 pm

Post by ERC »

Looking at front of SVA they are:

Red---Yellow---Green---Black

These are readily available preassembled.

ERC
ERC
Posts: 6
Joined: Tue Oct 30, 2001 4:00 pm

Post by ERC »

Looking at front of SVA they are:

Red---Yellow---Green---Black

These are readily available preassembled.

ERC
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”