p1225 programming cablle software
Moderator: Queue Moderator
-
- Posts: 1890
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: ht1550 XLS,6 MT-1000,
p1225 programming cablle software
i cant seem to find wich cable the p1225 takes on the p1225 pageand does it take the same RSS as the m1225
It should thake the 1225 RSS, and that package is for windows 3.1, 95 & 98.
Here is the details on the programming cable, it uses 2 contacts on the battery.
Looking at battery from rear contacts left to right
X1 X2 X3 X4
X2 Data Ground goes to BUSS +
X3 Data Input goes to ground
Rib connections are the same as Maxtrac cable. needs the jumper.
This info IS on BatLabs site.
Here is the details on the programming cable, it uses 2 contacts on the battery.
Looking at battery from rear contacts left to right
X1 X2 X3 X4
X2 Data Ground goes to BUSS +
X3 Data Input goes to ground
Rib connections are the same as Maxtrac cable. needs the jumper.
This info IS on BatLabs site.
-
- Posts: 268
- Joined: Sat Sep 22, 2001 4:00 pm
WE use the same cable on P1225/GP300/GP350
we have the same cable for the gp300/
gp350/p1225 with no trouble.
- kf4sqb
- Posts: 1491
- Joined: Mon May 19, 2003 9:11 pm
- What radios do you own?: I can't enter that much....
Easy to build a programming adapter from an old charging cradle. Unless you use a one-hour charger base, you will have to move some contacts around, as they left the BUS+ contact out of the 8-hour charging base. Just attach the cable to the base of the contacts inside the base, and wire the RIB end the same as a GM300.
Raymond, sorry, but the GP series uses an entirely different cable/adapter than the P1225.raymond345 wrote:we have the same cable for the gp300/
gp350/p1225 with no trouble.
kf4sqb "at" wetsnet "dot" com
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
- kf4sqb
- Posts: 1491
- Joined: Mon May 19, 2003 9:11 pm
- What radios do you own?: I can't enter that much....
Quite simple to do, really. If you have a rapid charger base, all nessasary contacts are already there. Just connect two wires out of a cable of some sort to the base of the contacts, and the other end of the wires to the proper pins of a DB25 to fit the RIB (don't forget to jump pins 4 & 11 at the RIB end).
If you don't have the quick charger base, the data pin is missing. You will have to canabalise one from another charger if you want to still be able to charge with it, or move one of the outside pins to that position if you will not need to be able to charge with it.
As with J.Sanor, I can send you some pics of mine if need be, to get you started in the right direction.
If you don't have the quick charger base, the data pin is missing. You will have to canabalise one from another charger if you want to still be able to charge with it, or move one of the outside pins to that position if you will not need to be able to charge with it.
As with J.Sanor, I can send you some pics of mine if need be, to get you started in the right direction.
kf4sqb "at" wetsnet "dot" com
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-