Dodge Ram/Dakota Antenna Fender Mounts
Moderator: Queue Moderator
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 727
- Joined: Sat Oct 06, 2001 4:00 pm
Dodge Ram/Dakota Antenna Fender Mounts
Anyone know where to get them? Quite a pain in the ass modifying a regular flat fender mount. Thanks in advance for any help.
Chuck
Chuck
Did this on a Dakota a few years ago. With a vice, you can make a nice little form-fitting bend in the flat bracket and the hood will close over it perfectly.
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
- Some loser on rr.com
eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 727
- Joined: Sat Oct 06, 2001 4:00 pm
Thanks for the replies fellas. The reason I am looking for them is because I want to get away from the old hammer and vise trick. Beats them up pretty bad and a customer doesn't want that on a new install. As for Kens Electronics, thanks for the suggestion, but $9.95 a piec is quite a bit more than they should be selling for. wx4cbh, if you could get me the Larsen part number, I would greatly appreciate it. Thanks again to all.
West Crystal in Kelowna, BC, Canada.
They have about 8 different specialty mounts,
Plus bonus the Canadian dollar is cheap for people south of the 49
http://www.westcrystal.com/
http://www.westcrystal.com/nav/product/at1.htm
They have about 8 different specialty mounts,
Plus bonus the Canadian dollar is cheap for people south of the 49
http://www.westcrystal.com/
http://www.westcrystal.com/nav/product/at1.htm
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 727
- Joined: Sat Oct 06, 2001 4:00 pm