Bluetooth Speaker Microphone
Moderator: Queue Moderator
-
- Posts: 53
- Joined: Thu Mar 31, 2005 10:35 am
Bluetooth Speaker Microphone
Does anybody have any experience with the Bluetooth Speaker Mic for the Professional Series Radios (HT750/CDM750)?
How well does it work?
What kind of range do you get in feet from a mobile and from a portable?
Any practical advice you can give?
Is it worth the money?
Thanks,
Ken
How well does it work?
What kind of range do you get in feet from a mobile and from a portable?
Any practical advice you can give?
Is it worth the money?
Thanks,
Ken
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 255
- Joined: Mon Sep 06, 2004 11:27 am
- What radios do you own?: Moto, Vertex
I seen both models demo'd for the HT and the CDM and they worked pretty good...but things always work better doing a demo...
- Nick
- Nick
Nick Kuhn - Communications Technician/Technical Manager
AMP Electronics - Chillicothe, OH
http://www.amp-electronics.net
AMP Electronics - Chillicothe, OH
http://www.amp-electronics.net
-
- Posts: 53
- Joined: Thu Mar 31, 2005 10:35 am
Range
What kind of distance did you see demo'd?
-
- Posts: 53
- Joined: Thu Mar 31, 2005 10:35 am
Bluetooth Speaker Microphone Operating Difference
Just did some research, the literature says an operating range of 30ft depending on conditions. Does anybody have any experience with this?
-
- Posts: 53
- Joined: Thu Mar 31, 2005 10:35 am
Bluetooth Speaker Microphone Operating Distance
I just might try it, contact me in a month and I will let you know.
Debating about the expense over benefit, that is why I am looking for someone that has used it before.
Anybody out there?
Debating about the expense over benefit, that is why I am looking for someone that has used it before.
Anybody out there?
Info
I had one. I got rid of it though. It did work, as for distance, I got about 100 feet. The audio was good, both rx and tx. Now for the problems. Whenever you turned the radio off then back on, it had to re-marry. It took between 20 seconds to a minute. For a police or fire application, getting out of your car, turning on your radio, talking to the subject, then getting back in your car and turning it off, using your mobile for a check, getting out of your car, turning your radio back on, talking to your subject, the radio would have to marry and re-marry several times. Your radio was almost un- useable. (taking a minute to marry). If you had to call for help while it was marring, your radio was useless. Same for a fire application. If you were just turning you radio on and leaving it on, maby at a ham swap, the thing would be fine and work great.
Problem #2- The thing would not allow your radio to scan. It freaked the radio out, lights would blink and audio would chop terribly.
The unit was also very heavy. Remember, the weight of the mic itself, plus 4 aa batteries in it . Weighted down your shirt terribly.
I guess it depends on you application. Hope this helps..
Problem #2- The thing would not allow your radio to scan. It freaked the radio out, lights would blink and audio would chop terribly.
The unit was also very heavy. Remember, the weight of the mic itself, plus 4 aa batteries in it . Weighted down your shirt terribly.
I guess it depends on you application. Hope this helps..
Bluetooth with my MTX2000
OK, so I'm not getting the fancy-schmancy new radio with blue tooth built-in. What I want to do is use my Motorola HS850 with my MTS2000, via a poor-man's Bluetooth-to-non-Bluetooth-equipped-cell-phone interface (although the cost of these things really puts the "poor man" moniker in question).
I would imagine that with the addition of the correct 3.5mm plug, and the appropriate capacitors and resistors, it could be made to work with manual radio keying achieved through the BDN6676D that I already own.
(Version 2.0 will allow keying by depressing the multifuction button on the earpiece.)
Has anybody already beat me to the punch, and want to share from their successes and/or failures?
Scott
RFD326
I would imagine that with the addition of the correct 3.5mm plug, and the appropriate capacitors and resistors, it could be made to work with manual radio keying achieved through the BDN6676D that I already own.
(Version 2.0 will allow keying by depressing the multifuction button on the earpiece.)
Has anybody already beat me to the punch, and want to share from their successes and/or failures?
Scott
RFD326
You will not be able to key up the radio from your headset, as you would with the bluetooth speaker mic. You would have to key up from the radio.
All of the buttons on the HS820 (and probably therefore the HS850) have reserved functions for the headset. If you were to hold the handset button down for a few seconds while PTTing, for example, it would turn your heatset off.
All of the buttons on the HS820 (and probably therefore the HS850) have reserved functions for the headset. If you were to hold the handset button down for a few seconds while PTTing, for example, it would turn your heatset off.
-
- Posts: 151
- Joined: Mon Apr 14, 2003 5:09 pm