Ok..it's not "M", but somebody may know

jim · Post by **jim** » Wed Jun 12, 2002 1:44 pm

Anyone recommend a good aftermarket programming interface for Kenwood?

Will · Post by **Will** » Wed Jun 12, 2002 2:12 pm

They sell programming adaptors, interfaces, for Kenwood radios.
http://2wayprogramming.com

jim · Post by **jim** » Wed Jun 12, 2002 6:44 pm

I tried two of theirs and neither worked. The OEM Kenwood worked, however.
After speaking with them today, it seems that it is an "almost" compatible and not reliable like the Polaris for Motorola.
I have a feeling that I get to bend over for the real one!

Will · Post by **Will** » Wed Jun 12, 2002 11:31 pm

Thanks for the information, I will DELETE that vender info.
I may have the roadmap for one somewhere.

grenadiers · Post by **grenadiers** » Thu Jun 13, 2002 4:07 am

Which model of Kenwood are you attempting to program... (i.e. TK 270, TK370G, etc)

jim · Post by **jim** » Thu Jun 13, 2002 10:47 am

TK-350G, TK-730 and TK-830

jim · Post by **jim** » Thu Jun 13, 2002 10:47 am

TK-350G, TK-730 and TK-830

Anyone have a programmer for sale? Anyone a Kenny dealer that wants to sell me one for a good $ ?

grenadiers · Post by **grenadiers** » Thu Jun 13, 2002 11:33 am

Hey,

Check out the following eBay link.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 1359554161

This is the same unit I have and it programs my TK270G , TK3102 with NO problems!!

rhemti · Post by **rhemti** » Thu Jun 13, 2002 1:18 pm

I purchased a program cable from panter88 the above ebay link. The cable he sold me for my bosses kenwood mobile work terrific

n3obl · Post by **n3obl** » Fri Jun 14, 2002 7:28 pm

For the portables you can use the ham radio cable that program a ((I cant think off the top of my head)) g707 ??? it is 32 dollars from AES.. I made an adapter to go to 730 series mobiles from that cable.

Frank N3OBL
FF/EMT

jim · Post by **jim** » Sat Jun 15, 2002 7:15 am

What is the number for the cable from AES?

n3obl · Post by **n3obl** » Sat Jun 15, 2002 6:54 pm

It is PG4P which is used on the th-671A. It was like 32 dollars..

Frank N3OBL
FF/EMT

jim · Post by **jim** » Sat Jun 15, 2002 8:08 pm

What's the schematic to put on the modular jack and the dual-phonos?

trzenk · Post by **trzenk** » Sat Jun 15, 2002 8:23 pm

I purchased a adapter for the tk-730 off ebay from 2wayprogramming, and have never gotten it to work...

Will · Post by **Will** » Sat Jun 15, 2002 10:59 pm

I have the roadmap for the Kwd portable programming cable with the two plugs, 2.5 and 3.5mm.

jim · Post by **jim** » Tue Jun 18, 2002 10:15 am

A Texas-based company called "Epcom" makes a very nice unit as I just discivered. I just got to use one of these units that belongs to a local Kenwood tech and it worked great. It's also built very nice and comes with computer cable, mobile cable and portable cable. I just ordered on. If you are a company, you get it for $117.00

http://www.epcom.com
click on:

english
test equipment
programming equipment
kenwood
#SKPGAC

jim · Post by **jim** » Tue Jun 18, 2002 10:17 am

OOOPS!!!

http://www.epcom.net

Dot com, dot net....whatever!

grenadiers · Post by **grenadiers** » Tue Jun 18, 2002 11:28 am

I purchased one of these about 4 months ago and it's an all-in-one type unit.

With this you don't need anything else (except a computer and the RSS software of course

) and the price is not bad.

Check it out. He sells a lot of these on e-bay and there is one up for "auction" every few days.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 1359554161

jim · Post by **jim** » Tue Jun 18, 2002 12:20 pm

The one on eBay isn't the Epcom unit. I've seen the one from Hong Kong- it's built into the DB25 housing and it does only portables.

The Epcom is in a cast aluminum box and has a built-in battery, 6-pin modular jack for mobiles, DIN jack for HTs and a DB25 to the laptop. It also has status light.

jim · Post by **jim** » Thu Jun 20, 2002 8:16 pm

I just received my Epcom unit and it worked perfectly out of the box. It came with all cables, most software and AC adaptor.

Jaqx · Post by **Jaqx** » Sat Jun 22, 2002 5:13 pm

I got the EpCom unit about five years ago. It seemed to work fine for a while then it got a little finicky. I guess I used it for about two years or so and then traded it with a radio. I talked to the guy that has it now and he says it it still working fine for him.

I don't know if it's still the same unit but, I didn't like having to take the cover off each time to plug and unplug the battery. I guess I could have put in a switch but never did....

Jaqx

jim · Post by **jim** » Sat Jun 22, 2002 8:19 pm

They have a switch now.

Ray D. O'Mann #2 · Post by **Ray D. O'Mann #2** » Sun Jun 23, 2002 5:21 am

OK since we are discussing the "other" brands, how about the ICOM IC-F320? I recently acquired one and I haven't got a clue about what I need to buy/build to program it. It certainly wouldn't be worth it to buy an expensive programmer for just one radio, all the rest of my stuff is *M*

RCVMO · Post by **RCVMO** » Sun Jun 23, 2002 5:31 pm

I made my own TTL-RS232 converter out of a Maxim 234 IC and some caps and a 9 volt battery. It does all the Kenwood and yeasu lines.
Jimmy

Ok..it's not "M", but somebody may know

Ok..it's not "M", but somebody may know

above ebay link

More "other" mfr info....?