Hi, i brought 2 mx360 radios. ive fitted 1 of them with nln9998c batteries. 1 problem i blew the battery up so it does not even charge anymore. im sourcing two more from a friend who happens to deal in motorola radios. the other problem is. when i turn the radios on (the one with the keypad on it) it contuinously beeps. does that require programming like my MTX810 (see other posting on this). so what does the keypad do. can it work like a mobile phone or trunking system or something like that.
i can provoide a picture on request.
Clinton
has anyone heard of a mx360
Moderator: Queue Moderator
-
- Posts: 15
- Joined: Mon Dec 19, 2005 10:54 pm
-
- Posts: 15
- Joined: Mon Dec 19, 2005 10:54 pm
Plain MX360s are crystal controlled, and rarely worth spending money on.
The synthesized models are the MX360S, which are programmed with a computer, but again, parts are scarce, radios are old...NOT worth investing good money into...leave on the desk as a paperweight/conversation piece..
Enterprise.....One to beam up!
The synthesized models are the MX360S, which are programmed with a computer, but again, parts are scarce, radios are old...NOT worth investing good money into...leave on the desk as a paperweight/conversation piece..
Enterprise.....One to beam up!
MX-360S Models use a prom module which must be programmed with the suitcase programmer. I am unaware of any computer interface which can program the module. The last versions of the modules used eeproms which can be reprogrammed, but only with the right module on the suitcase programmer, and only with the suitcase programmer.
The majority of MX prom modules are one-shot types which can only be programmed one time. However, sometimes there are unused channels and banks in them which you can write to and still make use of a used one-shot prom.
The actual prom is an smd part, epoxied inside the metal module cap which screws down on top of the synthesizer module.
The -SP model with the keypad should have a DTMF encoder. A fairly large order of UHF models went to the Bell System companies as service crew radios. You can use it to control an autopatch, but it is still a non-duplex radio.
The majority of MX prom modules are one-shot types which can only be programmed one time. However, sometimes there are unused channels and banks in them which you can write to and still make use of a used one-shot prom.
The actual prom is an smd part, epoxied inside the metal module cap which screws down on top of the synthesizer module.
The -SP model with the keypad should have a DTMF encoder. A fairly large order of UHF models went to the Bell System companies as service crew radios. You can use it to control an autopatch, but it is still a non-duplex radio.
-
- Posts: 1102
- Joined: Thu Apr 04, 2002 4:00 pm
- What radios do you own?: More than I can count
MX360
Check the Top of the radio. If it says MX-300S it has the promm. (in Red under the antenna on the top of the radio) If not, then it has crystals.
Model number should be something like the following.
H43SXU3120AN
H= Handheld common to all the MX series
4 = High power on the hand helds, 2 would be a 1 watt radio
3 = VHF 1 is low band, 4 is UHF, 5 is 800 Mhz
SXU = programmable promm. some came with re usable promms
also has Encryption, unable to tell if DVP or DES unless you look at the modual and get a part number
AAU = is crystal radio
AXU is crystal with Enxryption
31 = PL, 11 is Carrier Sq. 61 is DPL
It should be noted, there were a number of special products noted by the model number ending in SPx (H43SXU4120SP06) you could get them with special single tones, scan, trunking ( on the 800 radios) almost anything if you were willing to spend enough money to get it.
I love them, but could never afford to get the R1801 programmer to get the Synth radios going.
Model number should be something like the following.
H43SXU3120AN
H= Handheld common to all the MX series
4 = High power on the hand helds, 2 would be a 1 watt radio
3 = VHF 1 is low band, 4 is UHF, 5 is 800 Mhz
SXU = programmable promm. some came with re usable promms
also has Encryption, unable to tell if DVP or DES unless you look at the modual and get a part number
AAU = is crystal radio
AXU is crystal with Enxryption
31 = PL, 11 is Carrier Sq. 61 is DPL
It should be noted, there were a number of special products noted by the model number ending in SPx (H43SXU4120SP06) you could get them with special single tones, scan, trunking ( on the 800 radios) almost anything if you were willing to spend enough money to get it.
I love them, but could never afford to get the R1801 programmer to get the Synth radios going.
MX 360
Does it by an chance say MX 360 T.. Whats the model number... but guessing on the symptom you've described. You have an MX 360 trunking radio in 800 MHZ. Its pretty much a conversation piece. The radio uses a combination of 5 channel elements and control boards with programmed chips to operate on first Motorola trunking systems. Yes the radio could do telephone on the systems. Pretty much useless other than a display.
But if you provide either a model number or what the top has in the way of knobs we can confirm what you have.
But if you provide either a model number or what the top has in the way of knobs we can confirm what you have.
-
- Posts: 289
- Joined: Wed Jan 14, 2004 12:11 pm
- What radios do you own?: APX7000, APX7500, GP280
The MX360 radios are excellent radios. I have several of them. They are a good way to get a pair of encrypted radios if you have need for encryption now-and-then. I don't think you'd wanna carry an MX360 every day, but they are great for backups or if you need encryption now-and-then.
As discussed above if they have the one-time burn EPROMS there are usually empty slots on them that can be burned, and sometimes you'll find the re-burnable EEPROM modules in the radios and they can be done over and over. I have had several burned and I know several people who have the equipment to burn them. If you can find one that has the prom in it and the encryption module in it then getting it going is just a matter of tuning up and programming. If you aren't moving far from the freqs that the radio is tuned up for when you grab it then you likely will not even need to tune it.......that has been my experience anyway.
I've found the radios with the encryption modules and proms in them at hamfests for $5 and $10; like I said, easy inexpensive way to get into encryption.
Just my 2 cents worth.
-Justin
As discussed above if they have the one-time burn EPROMS there are usually empty slots on them that can be burned, and sometimes you'll find the re-burnable EEPROM modules in the radios and they can be done over and over. I have had several burned and I know several people who have the equipment to burn them. If you can find one that has the prom in it and the encryption module in it then getting it going is just a matter of tuning up and programming. If you aren't moving far from the freqs that the radio is tuned up for when you grab it then you likely will not even need to tune it.......that has been my experience anyway.
I've found the radios with the encryption modules and proms in them at hamfests for $5 and $10; like I said, easy inexpensive way to get into encryption.
Just my 2 cents worth.
-Justin
Archbishop, Church of /\/\otorola.