DAYTON 2006!!! Who's IN?
Moderator: Queue Moderator
I'll be there
I'll be there - I think I'll wear my old IFR polo shirts (I can't wear them when I see customers, as "IFR" icht verboten and all must be Aeroflex now).
Of course, that could be a mistake as I could get mobbed by people wanting service monitor information...
And I will have my COM-120B in the car with me.
(No, I don't think I'll be able to get a hold of a 2975 lab machine, but I may look into it....)
Of course, that could be a mistake as I could get mobbed by people wanting service monitor information...
And I will have my COM-120B in the car with me.
(No, I don't think I'll be able to get a hold of a 2975 lab machine, but I may look into it....)
This is my opinion, not Aeroflex's.
I WILL NOT give you proprietary information. I make too much money to jeopardize my job.
I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
I WILL NOT give you proprietary information. I make too much money to jeopardize my job.
I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
- radioactive69
- Posts: 91
- Joined: Fri Jul 23, 2004 2:38 pm
Nope, that is what has been used for the past 4 years almost. So we've generally kept with that.KE4NYVJR wrote:OK, I saw those. I wasn't sure if they had been agreed on or were just random list people were throwing in. Thanks.JAYMZ wrote:It's about halfway down the first page of this thread.
Also... would any of you guys mind doing a joint Batlabs/Hamsexy dinner meet on Friday night?
Since there are a lot of cross memberships between the 2 sites it may make things a little easier.
JAYMZ
"Mom and dad say I should make my life an example of the principles I believe in. But every time I do, they tell me to stop it."
Calvin
"Mom and dad say I should make my life an example of the principles I believe in. But every time I do, they tell me to stop it."
Calvin
fest up...
I'm thinking of going... wondering if there's any chance of wireless internet outside?
•·•·•
Woody
---Please use the EMAIL button, not PM, tnx!---
Woody
---Please use the EMAIL button, not PM, tnx!---
Re: fest up...
Heh. Think about it....this is the biggest annual gathering of radio/nerd/electronics/computer people in the US. I'm sure there will be, though. I heard that there was a couple people hosting it there last year.Woody_99 wrote:I'm thinking of going... wondering if there's any chance of wireless internet outside?
-
- Posts: 233
- Joined: Tue Mar 26, 2002 4:00 pm
- What radios do you own?: GP300,HT1000, GM300, MT1000,
Heck yeh
Im in, let me know when it is guys, andy_sw_04@hotmail.com
-
- Kicked off for stealing.
- Posts: 18
- Joined: Thu Mar 30, 2006 7:41 pm
There is a sticky for this. Looks like Saturday and I think Outback Steakhouse is in the lead for votes. Address i'm sure wil be posted somewhere once it's worked out. I know where it is to drive there but not to give directions.matthew-baker wrote:I'm more than likely going to be there, since I live a 1/2 hour away!
When is this dinner thing, and where is it at?
On a different subject, is anyone from Batlabs pitching in on a flea market space? I'd like to get in on that if possible, if only to park a cooler and chair and maybe a radio or two.
Look, it's not in my nature to be mysterious. But I can't talk about it and I can't talk about why.
The directions are quite simple- take I70 to I75 south, get off at the Benchwood exit, turn west, the first road you'll come to is Miller Ln., go north and you can't miss it. Some of the map programs show an exit directly to Miller Ln. but as of last word IT'S NOT THERE!!!
Outback's address is 6800 Miller Ln.
Lonestar's address is 6868 Miller Ln.
Outback's address is 6800 Miller Ln.
Lonestar's address is 6868 Miller Ln.
We do need to get a bench count going, I know several members are getting them, so what's your numbers?
Last edited by Rick Rock on Thu Apr 20, 2006 11:05 am, edited 1 time in total.
- sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
NOt possible.alex wrote:And the hotel....Rick Rock wrote: Outback's address is 6800 Miller Ln.
Lonestar's address is 6868 Miller Ln.
6600 Block of Miller Ln.
Nah, that wasn't planned.
BTW-anyone want to bring a small repeater for the fun of it? If someoen had a high enough room it might be o.k.
Seth
I think a covert operation to the roof of Hara is in ordersglass wrote:OK
I can brign the gr300
what about antenna and location?
fleamarket area?
oh btw
repeater is on 442.900
anything in dayton on that freq?
Look, it's not in my nature to be mysterious. But I can't talk about it and I can't talk about why.
What's the frequency Kenneth?
I will be attending Dayton, and would love to hook up.
I would like to suggest a simplex frequency and pl so that anyone from here will be able to talk with anyone else from here.
I am a ham and GMRS licensee, but maybe some other folks are not so maybe a MURS freq with an odd PL will do the trick?
I hit the Outback a few times during my stay last year, not too far, nice place to meet.
I would like to suggest a simplex frequency and pl so that anyone from here will be able to talk with anyone else from here.
I am a ham and GMRS licensee, but maybe some other folks are not so maybe a MURS freq with an odd PL will do the trick?
I hit the Outback a few times during my stay last year, not too far, nice place to meet.
There's already a frequency plan that we use to gather on, and it's posted in this thread.
You can find most of us on those channels... Most of the time, most of us do run digital, but monitor analog if that's all you have.
-Alex
You can find most of us on those channels... Most of the time, most of us do run digital, but monitor analog if that's all you have.
-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
According to the OARC website (local repeater council), there is one way west of Dayton in a town called Eaton. It says it's on 173.8 PL. It seems far enough away, though, that you shouldn't have any problems. Especially if you run DPLsglass wrote:OK
I can brign the gr300
what about antenna and location?
fleamarket area?
oh btw
repeater is on 442.900
anything in dayton on that freq?
I will be there on 900 MHz HAM. Put drool proof plastic over all your cool radios and test gear .
I hope Panik brings back the sledge hammer guy for some entertainment.
________
Mike B
http://www.open.org/~blenderm/
I hope Panik brings back the sledge hammer guy for some entertainment.
________
Mike B
http://www.open.org/~blenderm/
You missed the year where he was smashing Micor's.....
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Was that the guy that was smashing the govt. split UHF Spectras last year in the back corner of the flea market lot?Mike B wrote:I will be there on 900 MHz HAM. Put drool proof plastic over all your cool radios and test gear .
I hope Panik brings back the sledge hammer guy for some entertainment.
________
Mike B
http://www.open.org/~blenderm/
Look, it's not in my nature to be mysterious. But I can't talk about it and I can't talk about why.
I asked for a room on one of the upper floors of our hotel, since we are about 3-4 air miles max from HARA. So you can put he repeater at my room if you like.sglass wrote:ax the chargerJAYMZ wrote:I am bringing, my cell phone, 1 VHF portable, 1 spare battery and 1 charger. Beyond that.... yer outta luck here.
I'll have the shoe and the impres
yeah 447.900 tim
do we have a spot for it?
JAYMZ
"Mom and dad say I should make my life an example of the principles I believe in. But every time I do, they tell me to stop it."
Calvin
"Mom and dad say I should make my life an example of the principles I believe in. But every time I do, they tell me to stop it."
Calvin
I will bring one. It's a small and easily transported base antenna. I have to find where I put it though and check the specs. Given it's short size(about 2ft long), the gain probably is unity or 2db but it will at least give everyone coverage around the hotel/longhorn, etc.sglass wrote:o.k.
antenna?
any of you locals have an antenna we can use?
Similar to this model but tunable:
http://www.antenex.com/c_search.asp?txt ... AIN+MODELS
Look, it's not in my nature to be mysterious. But I can't talk about it and I can't talk about why.
..
can you put your name on the IMPRES and bring it to the booth so we can have a single charger somewhere to hit our radios.
?
doug
?
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
Re: ..
Anyone charging a battery gets booth duty 'til the charge cycle is overbatdude wrote:can you put your name on the IMPRES and bring it to the booth so we can have a single charger somewhere to hit our radios.
?
doug
Look, it's not in my nature to be mysterious. But I can't talk about it and I can't talk about why.
How secure is this booth
How secure is this booth going to be - as in, will there be somebody there at all times, or somebody who can at least move expensive things into a safe place when the booth is not manned?
I *may* be able to grab my 2975, and having a place for it to live at Dayton, rather than it staying in my hotel room, would make testing things much easier for me. Of course, I would in turn allow folks to use it to test their own stuff.
I *may* be able to grab my 2975, and having a place for it to live at Dayton, rather than it staying in my hotel room, would make testing things much easier for me. Of course, I would in turn allow folks to use it to test their own stuff.
This is my opinion, not Aeroflex's.
I WILL NOT give you proprietary information. I make too much money to jeopardize my job.
I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
I WILL NOT give you proprietary information. I make too much money to jeopardize my job.
I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.