Motorola Convertacom

KA3ZPA · Post by **KA3ZPA** » Fri Jul 21, 2006 5:56 pm

I have a convertacom for my saber, i use the saber mike with the led display, i do my own programming , i would like to know how i can program the keys on the mike the number is NMN6150A. Will i be able to change channels on my saber with this hand mike , or just what will i be able to do using this mike.

Thank You
Allen

1 Adam 12 · Post by **1 Adam 12** » Mon Jul 24, 2006 5:33 am

Ok, the Saber MTVA mike with display, has the exact same functions as the 3 buttons directly under the display on your Saber radio. The buttons themselves are not programmable. They function exactly as the radio buttons do. There is a way to change channels on your Saber with the mike, but to do so you cannot have zones, and must select the option in the RSS. By doing this the radio loses use of the channel knob and uses the keypad to select channels instead. When this option is selected it will allow the mike also to function this way. If you use zones, then the buttons control Zone, scan, MPL, etc , but channels have to selected via the knob.