AS III Programming Question

Post by **Firebuff66** » Thu Jul 27, 2006 11:40 am

Hi

I just got an Astro saber III 800mhz has smartzone in it ect.
Anyway it came to me with a code plug in it, I want to get rid of it and make my own but it wont let me, it says i need a key.
Anyway to just get rid of this code plug to make a new one?
I dont need the trunking one thats in it.

Thanks

Josh · Post by **Josh** » Thu Jul 27, 2006 11:59 am

While I don't know off-hand if you can delete the whole system or not without a key, I know you can delete the modes from the zone. In doing so, you're not wasting any of your 255 mode capacity and you won't see any of it in normal operation, it'll all just reside in the codeplug.

-Josh

jmr061 · Post by **jmr061** » Thu Jul 27, 2006 12:20 pm

Add another default system and delete the one that is in there.

If you need a hand tell me what version programming software you are using. You can always send me a plug. Basically you have to blank whats in there.

Jason