Advisor Elite Help!

jetsonic14 · Post by **jetsonic14** » Mon May 15, 2006 7:25 pm

I have 2 advisor elites one with 13 cap code programmed in it and the other with 11 why is it that I only get messages from the first four cap codes?
Thanks Steve

GEMOTO · Post by **GEMOTO** » Tue May 16, 2006 2:12 am

I believe that they only support 4 capcodes. I doubt thatyou actually have 11 programmed in.

I have programmed them before as well as other types of pagers and most pagers only allow for 4 capcodes.

jetsonic14 · Post by **jetsonic14** » Tue May 16, 2006 4:03 am

No they hold 16 there specs even say so. I have 13 in 1 and 11 in the other.

Post by **Firebuff66** » Tue Aug 01, 2006 5:06 pm

I have one with 7 cap codes in it, problem i ran into was the cap codes had to have a numarical order to them for them to work next to each othe 1,2,3,4,5,6,7 etc. if you left a blank cap code between them it was OK no need to do the math 1 3 5 7 9 11 13 15. I did every other one so i would get pages, Somewhere on the net their is a big artical about programming them but i can't find it.

Advisor Elite Help!

Advisor Elite Help!

ADV