The facility I work at is a legimate user of the NJSP trunked system (HERN). We need to specify a means to monitor:
28304 HOSP STATE HERN STATEWIDE ALERT
28336 HOSP OPS HERN Statewide Operations
Nice to have:
27408 MICU STATE MICU Radio Network - Statewide Hospital Emergency Radio Network
27440 MICU TACTICAL 1 MICU Radio Network - Tactical 1 Hospital Emergency Radio Network
27472 MICU TACTICAL 2 MICU Radio Network - Tactical 2
57712 EAS EMERGENCY ALERT SYSTEM
Had considered adding another Zetron 208 remote, but the cabling costs make it a tough sell
Trunked Radio - Which Scanner is best
Moderator: Queue Moderator
-
spareparts
- Batboard $upporter
- Posts: 502
- Joined: Fri Dec 19, 2003 5:33 pm
My first question is: Is this a digital/Apco system?
If YES, then a Maxtrac will not work as it is incapable of digital operation.
Also, the 'Tracs don't have enough systems/channel capacity, which also renders them ineffective on the more modernized wide coverage networks, especially with simulcast statewide operations.
As for a scanner, I'd probably select the Uniden 396 as it is digital capable, as well as analog and it is compact and can easily be used anywhere without problem.
Cost is another factor as the Uniden 396 is about $500.00 a copy.
If you could get away with Maxtracs, what's the actual operational cost to acquire, program and power the 'stack' you would probably need as well, not to mention the power supplies, grounding and so on...and the table/shelf space these would require as well.
If YES, then a Maxtrac will not work as it is incapable of digital operation.
Also, the 'Tracs don't have enough systems/channel capacity, which also renders them ineffective on the more modernized wide coverage networks, especially with simulcast statewide operations.
As for a scanner, I'd probably select the Uniden 396 as it is digital capable, as well as analog and it is compact and can easily be used anywhere without problem.
Cost is another factor as the Uniden 396 is about $500.00 a copy.
If you could get away with Maxtracs, what's the actual operational cost to acquire, program and power the 'stack' you would probably need as well, not to mention the power supplies, grounding and so on...and the table/shelf space these would require as well.
NJSP is comprised of 3 SmartZone systems (not Omnilink) and is rumored to be slowly swtiching to an ASTRO system, but its been that way for a few years now with no known change.
If you are a legit user, and using a radio there, see if you can add the talkgroups into a scan list, and put your primary talkgroup in as a priorty scan member so you don't miss calls.
Other than that, any old trunking scanner will work. If NJSP is indeed going to go digital and you want to stay ahead, look at spending $500 for a digital scanner vs $100 or so for an analog only scanner.
If you are a legit user, and using a radio there, see if you can add the talkgroups into a scan list, and put your primary talkgroup in as a priorty scan member so you don't miss calls.
Other than that, any old trunking scanner will work. If NJSP is indeed going to go digital and you want to stay ahead, look at spending $500 for a digital scanner vs $100 or so for an analog only scanner.
Lowband radio. The original and non-complicated wide area interoperable communications system
Trunking Scanner
Since you suggested by your title that you are looking for a scanner, I just got a Uniden Bearcat BCD996T and I am putting it through its paces. I think it works very well and would probably satisfy the specified purpose.
-
spareparts
- Batboard $upporter
- Posts: 502
- Joined: Fri Dec 19, 2003 5:33 pm
PJ,
We have an NJSP Astro Spectra (L99DX+259L) with 2 Zetron 208 Tone remotes. The third location (alternate EOC) would require ~750 feet of cable and an RTNA circuit from Verizon. I'm trying to make sure I have covered all the options to reduce the cost.
BTW, I played with a cisco 2600 router with the LMR / IP option with less then adaquate results as well.
Martin
We have an NJSP Astro Spectra (L99DX+259L) with 2 Zetron 208 Tone remotes. The third location (alternate EOC) would require ~750 feet of cable and an RTNA circuit from Verizon. I'm trying to make sure I have covered all the options to reduce the cost.
BTW, I played with a cisco 2600 router with the LMR / IP option with less then adaquate results as well.
Martin
