quik-call II for ht1250

steve3094 · Post by **steve3094** » Mon Aug 07, 2006 3:20 pm

i have a ht1250 when i go to try to program the quik-call it's a light gray. why and what do i need to do to program it.
also under singnaling i don't have quik-call how would i get it there.

thanks
steve

HLA · Post by **HLA** » Mon Aug 07, 2006 5:18 pm

what's the model number on it? is it an ls or ls+?

steve3094 · Post by **steve3094** » Mon Aug 07, 2006 5:57 pm

Model #: AAH25SDH9DP5AN and it's an LS

steve3094 · Post by **steve3094** » Mon Aug 07, 2006 5:59 pm

the firmware version is R05.03.00 and option Bd firmware R06.01.01

Post by **escomm** » Mon Aug 07, 2006 6:30 pm

that model number is for an LS+ model and they don't have QCII signaling, only MDC1200 as far as I know.

HLA · Post by **HLA** » Tue Aug 08, 2006 7:01 am

ok the ls and ls+ radios won't do QCII or dtmf signaling and there is no way you will get it to work, you need a non ls model or a 1550

steve3094 · Post by **steve3094** » Tue Aug 08, 2006 5:55 pm

is there a reason that ppcps 4.00.00 won't work? sorry very new to this, first 1. also is there a way that i can use the codeplug from a 750 with mine if so how?

HLA · Post by **HLA** » Wed Aug 09, 2006 9:47 am

4.00.00 won't work because the radio has been written with a newer version and won't go backwards, call Motorola and get the newest version. and like i said there is no way you will get that ls model to do that, codeplug from a 750 is different. the ONLY way is to get a non ls model.

SPEAKER MIC · Post by **SPEAKER MIC** » Sun Sep 10, 2006 8:43 pm

you forgot to mention that it wont do select call or mdc in conventional...

i had that headache, but its been solved with a "6" model 1250 and 7150...

my friend with the l/s...
look on the bright side, you can record...

id say get some cash for it and get a 6 model, otherwise youre stuck with a recording, fancy, compact 16 channel radio..

thats how i fixed mine