MT1000 WITH RF BOARD DRILLED OUT - FIXABLE?
Moderator: Queue Moderator
-
- Posts: 1
- Joined: Mon Feb 12, 2007 7:55 pm
MT1000 WITH RF BOARD DRILLED OUT - FIXABLE?
I have found some MT1000 99 channel radios with the RF board drilled out. My first question is why someone would drill the RF board? My next question is how much of a pain would it be to get one of the radios working? Can I buy an RF board somewhere? If you can't tell, I'm new to radio mods and will probably get in over my head.
I would think you could grab another cheapo RF board and just replace it. I wonder, are they RF boards the same for the MT1000 and HT600 / P200 series? If so, even easier.
But, what about the controller? Did they drill through that too?
If you have a line on some of these at a good price I would be interested for the 99 channel top parts.
I have a couple of lowband units and I would like to increase the channel capacity.
But, what about the controller? Did they drill through that too?
If you have a line on some of these at a good price I would be interested for the 99 channel top parts.
I have a couple of lowband units and I would like to increase the channel capacity.
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
drilling to kill...
Putting a large diameter drill bit through a radio from
the outside is the government's (usually military) way
of insuring that no one will ever be able to use the
radio as a radio again. It's obviously one of the dumbest
actions they could take but they think it's a good idea.
the outside is the government's (usually military) way
of insuring that no one will ever be able to use the
radio as a radio again. It's obviously one of the dumbest
actions they could take but they think it's a good idea.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
- FireCpt809
- Posts: 1846
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
/\/\otorola also do similar thing although the last time was just hit the radios with a hammer.
When we did a trade in to digital they came on site and smashed the old radios and threw them in the skip.
If you had hundreds of radios then a drill would make sense as it is quick and easy.
Motorola is in the biz of new equipment and don't want second hand products on the market.
When we did a trade in to digital they came on site and smashed the old radios and threw them in the skip.
If you had hundreds of radios then a drill would make sense as it is quick and easy.
Motorola is in the biz of new equipment and don't want second hand products on the market.