Egads !! Photo of the STX Program Connector

Monty · Post by **Monty** » Sat Nov 03, 2001 8:39 am

<HTML>
<h3>
 EGADS !! Hopefully this will solve the problem></h3>

<li>See the photo !! This is a Older Series Program Cable
which I have used for years. Works Great for me.
<li> The Screw at the bottom secures the Contact face to the cover shell.
<li><img src="http://www2.4dcomm.com/metrotech/stx_wc.jpg" border=0>

When addrssing the STX821's for reading / writing, you
should make sure your Contacts are Clean, and free of
debrie. Also I would recomend a stable programming
platform. If you give up, I have STX821's which
have the Enhanced Boards for 195.00+Shipping.
Monty
</HTML>

[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:40 ]

[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:42 ]

CHEFA2001 · Post by **CHEFA2001** » Sat Nov 03, 2001 9:10 am

Sorry to keep going on and on with this but I am going to try and re do everything later today or tomorrow and will post my success or lack of it then.

Thanks