Bad dispaly on a HT1550 XLS dead pixels can anyone help?

[motofan44705]

As the listing say I have a HT1550 XLS UHF cosmetically it is in EXCELLENT shape transmits and receives great BUT the dispaly is bad tons of dead pixels cand anyone help me out?

Jim

[ve3nsv]

You will need to replace the LCD display among other things to fix this as this is a known issue with the HT1550XLS.

- LCD part number 5105385Y57. This is the same as the old one. All old parts have been purged.
- Keypad board part number 0104020J46. This should be a Rev. F which is printed on the board itself.
- Poron pad part number 7586477Z01. This needs to be placed on the back of the speaker magnet.
- Display pad part number 7585688Z01. This needs to be placed between the plastic housing and the new LCD.

SRN related to the missing pixels - SRN1502A

Symptoms:
Radios exhibit missing pixel rows or columns in its display.
Potential Problem Radios:
All HT1550XLS radio’s built before date code 5305 are potentially affected. Eligible serial numbers for this repair are
xxxxFPxxxx or earlier. Tanapa numbers are as follows:
VHF (136-174MHz) UHF Band1 (403-470MHz) UHF Band 2 (450-527MHz)
PMUD1716A PMUE1762A PMUE1763A

[bezking]

One can be found cheaply on eBay.

[motofan44705]

Looked on Ebay don't see one.

Jim

[fire_master_21]

Yes there is. Just found one.

[J.Sanor]

Must be a secret


PM sent jim

[fire_master_21]

Must be a secret


PM sent jim

it's not a secret. It's just not my auction so I didn't post a link here in the open. If you would like the link shoot me a pm and I will pass it out.