HT1000 channel bandwidth

N2YP · Post by **N2YP** » Mon Sep 02, 2002 7:29 am

Can one program the HT-1000 for a bandwidth of 12.5? If so how? Can I program channel 1 with a bandwidth of 12.5 and channel 2 a bw of 25 and so on. TIA

RadioSouth · Post by **RadioSouth** » Mon Sep 02, 2002 8:16 am

Sure can, from the programing page where you have the individual channel info. displayed (freq,PL,etc.) there's one of the F keys designated
'channel options' or similar wording and when you go to that page there's
a selectable bandwith for the channel.

N2YP · Post by **N2YP** » Mon Sep 02, 2002 8:21 am

Found it! Many thanks

davevan · Post by **davevan** » Mon Sep 02, 2002 10:50 am

Make sure that the Model number for the HT1000 ends in "DN", if its AN or BN it probably won't work as those radios were produced before the 12.5kHz implementation.

That's what I've been told anyways.

Dave

HT1000 channel bandwidth

HT1000 channel bandwidth

THANKS