Hi all!
How many channels hold Motorola MT2100 Model I?
I have spent hour for searches in Google, but have found the information only about Model III (aka B7/C7).
How many channels hold Motorola MT2100?
Moderator: Queue Moderator
- MotoFAN
- Posts: 1054
- Joined: Thu Jun 28, 2007 6:46 am
- What radios do you own?: Approx. 50: Moto & Kenwood
How many channels hold Motorola MT2100?
I am biggest fan of XTS2500 and ASTRO Digital Saber.
- michiel sanders
- New User
- Posts: 32
- Joined: Fri Nov 02, 2007 2:00 pm
- What radios do you own?: astro saber, gp380, xts3000
Re: How many channels hold Motorola MT2100?
if it has a channel switch without a stop it can hold 250 channels.
this whas when i programmed with wookie,
i dont know how manny channels it takes with the official dos rss.
this whas when i programmed with wookie,
i dont know how manny channels it takes with the official dos rss.
GP380 EX Uhf, GP340 EX Uhf, GP340 Uhf, GP1280 Uhf
Astro Saber I Uhf, Xts3000R I Vhf
Saber III Uhf, Saber III Vhf
GM1280 Uhf, GM380 Vhf
Stornophone CQF9000 Uhf
Astro Saber I Uhf, Xts3000R I Vhf
Saber III Uhf, Saber III Vhf
GM1280 Uhf, GM380 Vhf
Stornophone CQF9000 Uhf
Re: How many channels hold Motorola MT2100?
All MT2100 are capable of 250 channels. Wookie or regular Skywalker RSS doesn`t matter. A continous rotary radio is very nice to have. I allows to use all 250 channels also on top-display radios without keypad. You are no more limited to 16 channels each zone, but 3 Zones are the maximum (switchable via 3-position toggle switch).
Keygun
Keygun
- MotoFAN
- Posts: 1054
- Joined: Thu Jun 28, 2007 6:46 am
- What radios do you own?: Approx. 50: Moto & Kenwood
Re: How many channels hold Motorola MT2100?
Thank you, Keygun.
But what will be if MT2100 flashed from MTS2000 Model I? It will not have continous rotary
But what will be if MT2100 flashed from MTS2000 Model I? It will not have continous rotary
I am biggest fan of XTS2500 and ASTRO Digital Saber.
Re: How many channels hold Motorola MT2100?
It is also no big deal. Replace the channel switch or (more simple) the whole control-flex/screen-assembly with one from a continous rotary radio (a scrap GP1200 is an ideal donation radio, because all of them have a continous rotary), change the modelnumber via Wookie and reprogramm the radio. It should work then. In the worst case you have to run the upgradetool again, but if i remember correct, this is only neccessary, if you are turning a top-display radio into an full-keypad model and vice versa.
Keygun
Keygun
Last edited by Keygun on Thu May 15, 2008 1:04 pm, edited 1 time in total.
Re: How many channels hold Motorola MT2100?
You are not limited to 16 channels each zone!
You can use up to 250 channels in one zone.
You are limited to 16 zones.
Andreas
You can use up to 250 channels in one zone.
You are limited to 16 zones.
Andreas