Minitor V Programming info.
Moderator: Queue Moderator
-
- New User
- Posts: 3
- Joined: Sun Aug 31, 2008 5:45 am
Minitor V Programming info.
I am trying to set up our software to program our own pagers and need some info on the programming software. Is there a book or a PDF file out there to assit me in programming these? Any help is greatly appreciated.
Re: Minitor V Programming info.
Motorola publication 6880309R95-O is the Min V pager programming guide. If you haven't subscribed for the software, you can order the guide from M . In addition, if you don't already have the programming hardware, you'll need a programming interface kit, also available from M, and a PC with a DB9 or DB25 serial or a USB port available.
RLN5831A=Programmer nest, software, and manual
RLN5709A=Programmer nest only
RVN4240A=Software CD w/programming manual
NLN3548B=Programming Interface(110V)
RLN5831A=Programmer nest, software, and manual
RLN5709A=Programmer nest only
RVN4240A=Software CD w/programming manual
NLN3548B=Programming Interface(110V)
Re: Minitor V Programming info.
I have a Minitor V Programming PDF file if your interested send me a PM
-
- New User
- Posts: 3
- Joined: Sun Aug 31, 2008 5:45 am
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: Minitor V Programming info.
Check your private messages. We use the abbreviation PM on this Board for that
function.
function.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: Minitor V Programming info.
To all those interested in the programming guide
Just download and install the Minitor V PPS and go to the folder on your start menu --> All Programs --> Minitor V PPS ---> Programming Guide
yes, the programming guide comes with the software that you can download free from motorola
Just download and install the Minitor V PPS and go to the folder on your start menu --> All Programs --> Minitor V PPS ---> Programming Guide
yes, the programming guide comes with the software that you can download free from motorola
-
- Posts: 52
- Joined: Sat May 08, 2004 6:26 pm
- What radios do you own?: cdm1550ls, maratrac, Pro9150,
Re: Minitor V Programming info.
Can some one pm me the link for the download thanks!
Re: Minitor V Programming info.
Have you even tried Googling it? It took me one search to find a direct link.
-
- Posts: 52
- Joined: Sat May 08, 2004 6:26 pm
- What radios do you own?: cdm1550ls, maratrac, Pro9150,
Re: Minitor V Programming info.
Yes i did tried googling it and no i came up with nothing except to purchase cables and programing cradles. Trust me i wouldn't have asked if i didnt go looking first.
Re: Minitor V Programming info.
This will take you to where you can download 1.4. There is a newer version (1.7?), but I don't know where you can DL that one
http://www.motorola.com/governmentanden ... ad/id_823i
RG
http://www.motorola.com/governmentanden ... ad/id_823i
RG
Wyrd bið ful ãræd, Fate is inexorable...
Re: Minitor V Programming info.
I've viewed the Programming Guide, but need some guidance...
What are the differences between Probability Scan, Priority Scan, and Silent Scan?
Thanks!
Mike
What are the differences between Probability Scan, Priority Scan, and Silent Scan?
Thanks!
Mike
Re: Minitor V Programming info.
Probability Scan - The pager will scan between F1 and F2 stopping whenever a transmission is detected on either channel. The pager will lock onto the channel and will not release that channel until the transmission ends. The pager will alert in both F1 and F2 channels when in the non priority scan position.
Priority Scan - This function will scan for this first active channel, but when F2 is the active channel, will scan back at periodic intervals looking for activity on the priority channel F1. Should F1 become active, the pager will switch to F1 until activity ceases.
Silent Scan - Scans between F1 and F2 but does not open the audio unless you receive an alert.
-Marc
Priority Scan - This function will scan for this first active channel, but when F2 is the active channel, will scan back at periodic intervals looking for activity on the priority channel F1. Should F1 become active, the pager will switch to F1 until activity ceases.
Silent Scan - Scans between F1 and F2 but does not open the audio unless you receive an alert.
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
Re: Minitor V Programming info.
Are Probability and Priority Scan in Monitor Mode then, while Silent Scan is Selective Call?
Re: Minitor V Programming info.
FFMikeM wrote:Are Probability and Priority Scan in Monitor Mode then, while Silent Scan is Selective Call?
Correct.
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
Re: Minitor V Programming info.
Marc,
So I want to setup a scan for 2 different sets of tones, we'll call them tone set A and tone set B. On my Minitor V I want SelCal for both. I want it to scan, but i can't miss tone set A. Whats my best option?
Mike
So I want to setup a scan for 2 different sets of tones, we'll call them tone set A and tone set B. On my Minitor V I want SelCal for both. I want it to scan, but i can't miss tone set A. Whats my best option?
Mike
Re: Minitor V Programming info.
You don't need to set up a scan to be active for more than one set of tones on the same channel. Minitor Vs will decode up to 8 unique cap codes and 4 group calls per channel. In the coding option select R168(none) and that will give the option of multiple cap codes.
Wyrd bið ful ãræd, Fate is inexorable...
Re: Minitor V Programming info.
My bad,,, they are on 2 different frequencies
ai4ui wrote:You don't need to set up a scan to be active for more than one set of tones on the same channel. Minitor Vs will decode up to 8 unique cap codes and 4 group calls per channel. In the coding option select R168(none) and that will give the option of multiple cap codes.
Re: Minitor V Programming info.
There is no sure fire way to do this. My understanding of how the silent scan works is that if the channel is active with a tone that is a match for the first tone of the cap code the pager will stop on that channel to listen for the second tone. If there is just a carrier or some other tone the scan will slow but it won't stop.
Even still, you're gonna miss a page. The only way to be close to 100% is to carry two pagers.
Even still, you're gonna miss a page. The only way to be close to 100% is to carry two pagers.
Wyrd bið ful ãræd, Fate is inexorable...
Re: Minitor V Programming info.
We are paged out on two different, fairly active channels, and use Minitor Vs. I'm not aware of anyone ever missing a page because the other channel was talking, nor have I experienced it. I've got 35 pagers set up this way. I've even tried using two service monitors with a constant carrier on one (even a tone) and proper toneset on the other, and the pager alerts as it should.