System Saber Channels

[asd6845]

New to the board here.

I tried searching all the topics possible for my answer, and could not come across an answer or even if someone already posted this question.
A friend and I are programming a couple of System Saber III's (using Version 4 of the System RSS). The problem that we are running into is the radios seem to be stuck at only accepting 8 channels per zone with no noticeable option to make it the full 16 channels per zone.

Does anyone out here on the boards have any bit of info as to a way of correcting this?

This is just really annoying that these radios will not program to its max channel capacity per zone.


Thanks,
Daniel

[Tom in D.C.]

Go into the RSS and find the place where you add channels, then add them, up to
16 per zone.

An RSS is a fairly complicated, multi-layered structure, with all kinds of "buried" capabilities
in it, sub-menus, etc. etc. If you don't have the programming book then you'll just have to
dig until you find what you need.

[Andy Brinkley]

Tom is correct in that the System Saber RSS is not for the faint at heart.
You first create the personalities then assign each one to a zone and channel.

[FireCpt809]

Did you try the page up/page down keys when on the zone page?

[asd6845]

Good news. My friend got the sabers to accept the 16 channels per zone.

Bad news. I wasn't there to see how he did it.

Anyways, thanks to all who responded so quickly to this post.

Now I need to see about scheduling some time to see how we can "mess up" the code plug... hehehe...