cdm1250 that wont power up

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Jay
Batboard $upporter
Posts: 723
Joined: Wed Sep 05, 2001 4:00 pm

cdm1250 that wont power up

Post by Jay »

I have a CDM1250 that was working one day, and then not the next. It will not power on at all. I've troubleshot the fuse in the head, tried another head, and made sure the radio isn't set up for ignition control (never was). Can anyone recommend other points to troubleshoot? Are there any fuses on the board like the GM300s, etc?

Thanks
Jay
Top
jims123
New User
Posts: 31
Joined: Thu Sep 24, 2009 12:09 pm
What radios do you own?: HT1250,750.cdm750.1250 1550XT2

Re: cdm1250 that wont power up

Post by jims123 »

See J0401 were the control head connect to it may have bad solder join on the pin, if this dont work check Q 0641 it may be open..
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”