Systems Saber III - how to set radio password?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
radio-link
Posts: 245
Joined: Sun Mar 16, 2003 8:49 am

Systems Saber III - how to set radio password?

Post by radio-link »

Hi,

I have problems enabling a kind of power on password in Systems Saber III radios, should be firmware 7, AFAIR. There is a menu in the CPS that aloows entering such a password, but I can not get the radio to request the PW. With my German Police Saber III radios this was straight forward, I enabled it in the RSS, and it worked.

What am I missing?
regards - Ralph, dk5ras

--

Ralph A. Schmid http://www.bclog.de ralph@schmid.xxx
Tel./SMS +49-171-3631223
User avatar
d119
Posts: 3533
Joined: Tue Mar 19, 2002 4:00 pm

Re: Systems Saber III - how to set radio password?

Post by d119 »

Hello Ralph,

First off, the Systems Saber portables don't use CPS, they use RSS. Major difference in operation there otherwise I wouldn't have said anything. CPS is [usually] always Windows based.

In order to be able to enter a password and use the radio lock feature, you must first turn the feature on in the radio. Try looking in the "Display Options" part of the RSS (F4 to change/edit codeplug, and I believe it's F3 for display options). Radio Lock should be enabled to allow entry of the password, etc. to use the feature.
User avatar
k5hdm
NOT ALLOWED TO BUY/SELL/TRADE
Posts: 73
Joined: Sat Nov 10, 2007 1:28 am
What radios do you own?: Lots

Re: Systems Saber III - how to set radio password?

Post by k5hdm »

Maybe this post I just made will help:
http://batboard.batlabs.com/viewtopic.p ... rd#p391834
-Harmon - K5HDM
http://www.k5hdm.com
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”