EX600 XLS

Radio Crazy · Post by **Radio Crazy** » Fri Aug 27, 2010 9:33 pm

Hi can any one tell me the prodcedure to get this EX 600 XLS into booth strap so I can upgrade the firmware. I have the OEM booth strap dongel that goes between the computer and ribless cable, all are oem cableing, and it still refuses to go to Booth strap. Can I do a forced booth strap with a combination of buttons on the radio, like hold down orange button and one side button and PTT? Any help would be appreciated. BTW have all up to date CPS and firmware subscription.

HLA · Post by **HLA** » Sat Aug 28, 2010 12:16 am

just follow the directions on the screen, remove the battery and replace it when it tells you to

Radio Crazy · Post by **Radio Crazy** » Sat Aug 28, 2010 2:17 pm

HLA wrote:just follow the directions on the screen, remove the battery and replace it when it tells you to

Sorry you are incorrect it does not work on an EX 600 XLS

Post by **escomm** » Sat Aug 28, 2010 2:59 pm

Radio Crazy wrote:
HLA wrote:just follow the directions on the screen, remove the battery and replace it when it tells you to
Sorry you are incorrect it does not work on an EX 600 XLS

Actually he is correct. You may have a problem with your cable, adapter and/or radio. Feel free to peruse the help file to confirm this fact.

Radio Crazy · Post by **Radio Crazy** » Sat Aug 28, 2010 3:22 pm

escomm wrote:
Radio Crazy wrote:
HLA wrote:just follow the directions on the screen, remove the battery and replace it when it tells you to
Sorry you are incorrect it does not work on an EX 600 XLS
Actually he is correct. You may have a problem with your cable, adapter and/or radio. Feel free to peruse the help file to confirm this fact.

You know what I posted wrong I don't have a ribless cable for the EX600 XLS I have the ribbed cable, and it is OEM also I have all the other OEM stuff, OEM rib and OEM dongle, I will try again, and report, thanks again, RC

Post by **escomm** » Sat Aug 28, 2010 3:23 pm

What model number is your flash adapter? D revision? I've had problems with the flash adapters randomly taking dumps on me, have had to warranty a couple that failed for no obvious reason.

Radio Crazy · Post by **Radio Crazy** » Sat Aug 28, 2010 9:51 pm

Model # AAHLN9742D

HLA · Post by **HLA** » Thu Sep 02, 2010 3:52 pm

Does the whole setup with flash adaptor inline read the radio normally? at least take a pencil eraser to the contacts and make shure they are clean

Post by **HumHead** » Fri Sep 03, 2010 6:32 am

Forgive my asking an obvious question but, if you are using a cable with a RIB, you are putting the flashing adapter between the RIB and the radio cable, not between the RIB and computer, correct?

MotoFAN · Post by **MotoFAN** » Sat Sep 04, 2010 5:39 am

HLA wrote:Does the whole setup with flash adaptor inline read the radio normally? at least take a pencil eraser to the contacts and make shure they are clean

Yes, CPS should work normally even when radio connected via FLASH adapter.

Radio Crazy · Post by **Radio Crazy** » Sat Sep 04, 2010 9:15 pm

Thanks for all the replies, will update this thread soon as I get the OEM program cable for the EX600, thanks

Radio Crazy · Post by **Radio Crazy** » Tue Sep 07, 2010 2:32 pm

Hi, bought an OEM EX600 program cable from a member of the board, and it worked like a charm, with the boothstrap dongle, just upgraded the EX600 XLS to fimeware R05.16.01, thanks to all who responded, and once again you guys are right. This forum is a very valuable resource, thank you all for your responses, R C

EX600 XLS

EX600 XLS

Re: EX6000 XLS

Re: EX600 XLS

Re: EX6000 XLS

Re: EX600 XLS

Re: EX6000 XLS

Re: EX600 XLS

Re: EX600 XLS

Re: EX600 XLS

Re: EX600 XLS

Re: EX600 XLS

Re: EX600 XLS