Zetron 4010 Question

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
pluto1914
Batboard $upporter
Posts: 218
Joined: Thu Feb 17, 2005 8:23 pm
What radios do you own?: A few APXs

Zetron 4010 Question

Post by pluto1914 »

We ave a few Zetron 4010 in our dispatch center. We recently added a new tone remote board with audio delay. Since setting the audio delay to .5 seconds there is a noticeble hum whenever the the PTT button is depressed.

Its not the wiring to the console or the mic as we have disconnected both. The consoles are out of warranty so no help in calling Zetron. Anyone else notice this hum on their Zetrons?

Thanks.

David
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: Zetron 4010 Question

Post by Jim202 »

pluto1914 wrote:We ave a few Zetron 4010 in our dispatch center. We recently added a new tone remote board with audio delay. Since setting the audio delay to .5 seconds there is a noticeble hum whenever the the PTT button is depressed.

Its not the wiring to the console or the mic as we have disconnected both. The consoles are out of warranty so no help in calling Zetron. Anyone else notice this hum on their Zetrons?

Thanks.

David


Did you try removing the tone remote board and see if the hum goes away?

Jim
pluto1914
Batboard $upporter
Posts: 218
Joined: Thu Feb 17, 2005 8:23 pm
What radios do you own?: A few APXs

Re: Zetron 4010 Question

Post by pluto1914 »

I have one console without the audio delay on the tone board and it works fine but the audio is clipped becasue they cannot wait to talk.

On the consoles that have the tone board with audio delay, if I disable the Mic Bus delay the noise goes away. It's very strange and annoying.

David
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”