Maratrac cable question

[moustache]

Hello,
I was able to get a control cable and clam shell head. The only problem is that someone cut the end off the cable that goes to the clamshell.

Can anyone tell me what the pin numbers are to which colored wire. I have some pins but no idea of what geos to what.
I also have a complete cable from a 4 channel mirek if that can work on the maratrac. Any help is greatly appreciated....

[Bill_G]

Look for an old Motrac, Mitrek, or Mocom 70 cable diagram. Same cable pretty much.

[kcbooboo]

Is there any reason why you can't look directly in the VHF-L or VHF-H MaraTrac manual, available on-line? It has FULL diagrams with wire colors and numbers for the "Basic" or clam-shell head and control cable.

Bob M.

[SteveC0625]

http://www.repeater-builder.com/motorol ... index.html

repeater-builder.com is an online resource that we all should be familiar with.

[moustache]

Thank you all for the help...