Hey Guys,
Working on an sm50 VHF that has an open squelch problem. The radio is programmed with TPL in Tx and Rx. The Rx light blinks constantly and if the radio mic is removed from mic clip there is constant noise from the speaker (as if in permanent monitor mode). The radio receives fines and when in mic clip the squelch opens at about -119dBm with the proper tone. The radio does transmit but has no transmit audio. Have tried different mics. Not sure if the two problems are related or not. I have disabled all of the buttons on the radio to make sure its not somehow getting into constant monitor mode.
Any ideas would be much appreciated.
Thanks
Jamie
SM50 Constant Open Squelch
Moderator: Queue Moderator
SM50 Constant Open Squelch
"Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, torn up and shouting... "Holy Sh*t...what a ride!!"
Re: SM50 Constant Open Squelch
crap, wrong area....not paying attention
"Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, torn up and shouting... "Holy Sh*t...what a ride!!"