Xtl5000 w3

[firemedic4]

Does the xtl5000 w3 need a control cable or can it hook to the brick part and work. thanks

[jmr061]

On a mid power it can connect directly to the brick. Don't forget that the W3 has its own special interconnect board.

On a high power you must use the Y-cable unless you would make your own DB25 for ign sense and speaker to be used on the 2nd DB25 port on the front of the radio.

[firemedic4]

Do you happen to have the part number for the interconnect board... thanks

[escomm]

PHLN6901D high power