Help identify this UHF dipole

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
sailor
Posts: 37
Joined: Tue Jul 21, 2009 11:00 am

Help identify this UHF dipole

Post by sailor »

Howdy,

I picked up this 4 bay UHF dipole a few years back, and had it in the box until a couple days ago. Now I have no idea what model it is. The only thing I recall is that it was made by Antenna Specialists. Anyone have any idea??

Image

Image
User avatar
abbylind
Posts: 527
Joined: Mon Nov 05, 2001 4:00 pm
What radios do you own?: What dont I own?

Re: Help identify this UHF dipole

Post by abbylind »

Looks like a DB-404 or a variant thereof....
Q: Does this unit come with a speaker?
A: hello yes its in the radio thanks
sailor
Posts: 37
Joined: Tue Jul 21, 2009 11:00 am

Re: Help identify this UHF dipole

Post by sailor »

Hello again,

I didn't have much luck finding what model this is, and now I have no idea what the element spacing should be. Any ideas?
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Help identify this UHF dipole

Post by Bill_G »

The harness pretty much says it all.
User avatar
abbylind
Posts: 527
Joined: Mon Nov 05, 2001 4:00 pm
What radios do you own?: What dont I own?

Re: Help identify this UHF dipole

Post by abbylind »

PETNRDX
Posts: 870
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

Re: Help identify this UHF dipole

Post by PETNRDX »

I can't determine the brand of that, but it isn't a DB-404.
Yours is a standard 4 bay, not double bays like the DB-404 & 408.
Yours uses stainless steel hose clamps, to attach the bays.
I have used that brand before, but I can't recall who made them.
Light weight, but worked OK.
Steve K.
sailor
Posts: 37
Joined: Tue Jul 21, 2009 11:00 am

Re: Help identify this UHF dipole

Post by sailor »

Thanks guys.

I did sort of guess based on the harness, but it could have easily worked from about 20" to 25" center to center. To test, I mounted them about 21" but the problem is there's no easy way to gauge the pattern. Ran it on the analyzer and it's flat across the 10Mhz I checked.

How great of an affect will there be based on incorrect spacing?
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Help identify this UHF dipole

Post by Bill_G »

Hard to say without having a firing range to test it on. Set it up as an omni, and you probably won't notice any issues.
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: Help identify this UHF dipole

Post by Jim202 »

I believe that Bill meant to say an antenna range and not a firing range.

Jim
PETNRDX
Posts: 870
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

Re: Help identify this UHF dipole

Post by PETNRDX »

Measuring a couple other 440 antennas, that 21 to 25 sounds about right.
I would think it will work fine if you are off the designed spacing.
Might not have exactly the same gain, and maybe the pattern will skew a little, but you probably won't be off enough to notice. Might be hard to measure the difference.
If you have good return loss, I would use it.
Steve K.
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Help identify this UHF dipole

Post by Bill_G »

Jim202 wrote:I believe that Bill meant to say an antenna range and not a firing range.

Jim
Yep. We had a chamber at GM Proving Grounds we called the firing range to blast cars and trucks with RF. It was also used by other groups to test their antennas.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”