I have just put in a system at a Jail with a XPR8400 Repeater and about 40 CP200D Digital Radios. The complaint we are have is they are saying the radios are giving to much feedback and very echo sounding. My question is there anything in the software that i can do to make this better. The repeater or radios? They are very unhappy with the radios and it seems i only get this type of comments when using CP200D digitals. Has anyone else had this problem as well.
John
CP200D Digital Portable
Moderator: Queue Moderator
-
johnny1225
- Posts: 229
- Joined: Thu Jul 22, 2004 8:27 am
-
SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: CP200D Digital Portable
Is this a MOTOTRBO system? If so, you may want to look over this thread over on communications.support (formerly P25.ca.)johnny1225 wrote:I have just put in a system at a Jail with a XPR8400 Repeater and about 40 CP200D Digital Radios. The complaint we are have is they are saying the radios are giving to much feedback and very echo sounding. My question is there anything in the software that i can do to make this better. The repeater or radios? They are very unhappy with the radios and it seems i only get this type of comments when using CP200D digitals. Has anyone else had this problem as well.
John
http://communications.support/threads/8 ... trbo+audio
Re: CP200D Digital Portable
They can tell the the serving dealer to refer to the service bulletin out on this. It's all about the firmware version and the audio settings. First thing I would do though is turn off AGC.
-
KitN1MCC
- Posts: 1890
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: ht1550 XLS,6 MT-1000,
Re: CP200D Digital Portable
get the newest firmware in there