Weird scan issue
Moderator: Queue Moderator
- blackwater
- Posts: 50
- Joined: Fri Dec 03, 2010 12:45 pm
- What radios do you own?: XTS-5000, APX 7000 8/U
Weird scan issue
So I have some XTS-5000 model 1's setup to scan 3 conventional channels. A couple of things are happening and I can't figure out if its a setting I've missed or what. So when you turn scan off via the programmed button it will not let you enable scan again without turning the radio off and back on. The radio seems to auto scan when you turn it on, the green light starts flashing. Auto scan isn't enabled in CPS. Running CPS 20.01, and the firmware is R16.02 for the radio.
Weird Scan Issue
I think the Motorolas that I have programmed, I have generally used the toggle A-B-C to deal with scanning. Are you using the toggle switch or the side programmable button?
- blackwater
- Posts: 50
- Joined: Fri Dec 03, 2010 12:45 pm
- What radios do you own?: XTS-5000, APX 7000 8/U
Re: Weird Scan Issue
Well I have tried it in two different locations. The emergency button and the top button on the side of the radio. People are complaining about hitting the side button which is why I moved it to the emergency button.Jim1348 wrote:I think the Motorolas that I have programmed, I have generally used the toggle A-B-C to deal with scanning. Are you using the toggle switch or the side programmable button?
**Update** I just moved it to the ABC toggle and it worked fine. That will solve the issue.