M1225 internal speaker pin location
Moderator: Queue Moderator
M1225 internal speaker pin location
Hi. I’m new here,, I have a M1225, I’m hooking up an external speaker, and I still want the internal speaker to also work. I know I need a jumper on the plug for the external speaker plug I have. What pins do I jump ? 8/10 or 7/9 ? Thanks.
Re: M1225 internal speaker pin location
The accessory connector pins on the rear of this radio are pin 1 and 16.
Don't know if you need to jumper anything but pin 1 = external speaker -
and pin 16 = external speaker +
Don't know if you need to jumper anything but pin 1 = external speaker -
and pin 16 = external speaker +
fineshot1
NJ USA
NJ USA
Re: M1225 internal speaker pin location
There is no jumper required. The external speaker runs in parallel with the internal speaker. Just hook up the external speaker to pins 1 and 16.
if you want to disconnect the internal speaker, you need to cut jumper JU501 or disconnect the internal speaker at the speaker.
Note: The M1225 only supports an 8 ohm external speaker. Don't use a 4 ohm or 2 ohm speaker.
if you want to disconnect the internal speaker, you need to cut jumper JU501 or disconnect the internal speaker at the speaker.
Note: The M1225 only supports an 8 ohm external speaker. Don't use a 4 ohm or 2 ohm speaker.